Fluorescent grow lights lamps for Plants

Take into account fluorescent grow lights lamps to your herbs. Fluorescent tubes definitely are a minimal intensity lighting alternative terrific for herbs. Fluorescent grow lights lamps offers 60 to 80 lumens per watt, that’s two to 3 instances considerably more light than incandescent bulbs. At a distance of six inches (15.two cm) far from the bulbs, fluorescents supply 700 foot (213.4m) candles; at a distance of 12 inches (thirty.five cm) away, they give 450 foot (137.2m) candles. Fluorescent grow lights lamps lamp holders.

fluorescent light fixture grow lamp

Pick out full-spectrum fluorescent grow lights lamps that most closely mimics regular light. The light colour is created by a phosphor coating on the inside of your bulb. If full-spectrum purely organic light tubes are not accessible, use a mixture of regular warm- and cool-white tubes.

The fluorescent grow lights lamps is mainly composed of the lamp, fluorescent light ballast and starter. The two ends of the lamp tube have a filament, and the tube is filled with argon and micro mercury vapor, which is coated with a fluorescent powder. The working principle of the lamp and incandescent lamp is different, the gas between the two filament in the conduction time mainly emits ultraviolet ray, the fluorescent powder by the ultraviolet radiation to emit visible light.

Different types of luorescent grow lights lamps powder, the color is not the same as the color of the gas has a characteristic: only when the voltage at both ends of the tube to reach a certain value of the gas in the lamp tube to maintain a certain size of the current, the required voltage is much lower. Therefore, if the voltage of the 220V is added to the two ends of the tube, it can not be ignited. The ballast and starter can solve the problem of ballast is wound on the iron core coil, inductance. Starter by sealing static in the glass bubble contact piece and a U-shaped moving contact piece composition, glass bulbs filled with neon. Two contact pieces with a certain voltage, neon light, electricity, heating.

Location herbs shut towards the fluorescent lighting fixture supply, preferably no far more than eight inches (twenty.three cm) in the tube, to accommodate for that lower intensity lighting.Choose fluorescent lighting due to the fact the least high-priced solution for indoor gardening.

fluorescent lighting fixture grow lamps

Take into consideration high-intensity discharge (HID) lights. Most small business herb producers make use of HID lamps to grow herbs indoors. They usually produce two occasions much more light than incandescent or fluorescent bulbs. HID lighting supplies 120 to 130 lumens per watt, and is accessible in 150-watt to 1,000-watt bulbs. At a distance of three feet (.9 m) away from the bulbs, 400-watt HID lights give 1,000 foot (304.8m) candles and may well illuminate about 25 square feet (seven.six square meters).

The biological result of light on plants is wholly distinct in the visual effect in the human eye. The standard light supply is applied for plant lighting energy efficiency is very very low, which causes large power consumption and higher cost of electricity. Rapid growth of factory manufacturing, the quick maximize in vitality consumption, but in addition straight lead to a powerful demand for energy-saving light supply merchandise.

As a result, the development and industrialization projects of CCFL intelligent dimming program for plant growth and improvement, is conducive to expanding the application domain and also the consumption industry of CCFL dimming luorescent grow lights lamps. It truly is helpful to cut back the consumption of plants and agricultural manufacturing. It has the characteristics of high efficiency, vitality saving, security, environmental protection and so forth. Therefore, this project is adapted towards the desires of our country’s financial development, and it is closely related for the vitality bottleneck complications, energy conserving, consumption reduction and emission reduction.

How to rewire a lamp holder?

How to rewire a lamp holder? The tips as below:

The wire on my light fixture is too small, so I am trying to change it. The fitting/fixture (what is the correct period?) however would not play nice: I can’t understand the correct way to get rid of the old insert (and still have the capacity to insert the revolutionary one.

I’m not seeing any lamp holder, so it need to be some sort of attach thing. I’m not really too comfy applying excessive pressure towards plastic, as it may bend/break, before I do know I have the correct point to put my screw driver.

How to rewire a lamp holder

The point of these comment is when you try for you to shove stranded wire on to the typical stick in early spring loaded make contact with you are going to experience an unsafe predicament where the contact can be intermittent or be unfastened and lead to overheating in the contact location.

This getting too hot can at the worst case resulted in a fire. In case fire does not happen the heat within the contacts may lead to heat destruction of the cheap lamp outlet causing that to become crisp and susceptible to breakage.

It is rather improbable that the sleeve was made of iron. Greatly subjected it was a skinny brass materials. An edition for the stranded wire that will work is to help solder the concludes of the cable to make it “solid”. This will work in a reliable manner as long as there is little or no bending of the wiring in the area of your socket for the duration of normal using the table lamp. Soldering puts a good bond involving all the line strands and in case the cable moves throughout the small lengths just for the edge edge of the solder have a tendency to crack off eventually. On the other hand the actual crimp within sleeve.
I’ve got a camping swag type pendant light fixture which I like to hard cable in to the ceiling. I cut the plug off of the light fixture cord and ” cable ” it straight to the neutral and hot cables within the ceiling fixture recess. I ensured the neutral and hot wires went to the related terminals within the halogen lamp holder. There’s a floor cable within the ceiling recess, I haven’t touched this as my wiring does not have a ground and i’m not sure how to deal with this.

the tips to rewire a lamp holder

Anyway, while I switch the light on nothing happens. I can check out the very hot wire is energized as my live wire detector beeps when it’s close to it. It beeps all the way down towards the light fixture lamp holder.

Remarks: You need to mention when you first wired this up I had live and neutral corrected within the lamp holder and got a short while I switched it on. I do not think the fuse is blown since I get power and I changed the bulb to ensure the lamp wasn’t blown either.

The first thing to do is test the porcelain lamp holder itself. The easy way try this is to apply a multi-meter set to AC and an appropriate voltage setting for your supply voltage. Using the test leads, touch the bottom pin and the metal of the base exterior (the part the bulb screws into). It should read your supply voltage. If it does not then there is an issue with the lamp socket itself. If it reads the right voltage, either your bulbs are bad or they aren’t contacting with the socket. With the turn off, make use of a screw driver to gently lift the bottom pin up a bit and then try your bulb again.

Read more related items:  fluorescent lamp holdersE26 to gu10 lamp holder

Lamp holders for lamps

Lamp holders for lamps, including wires, the positive terminal, a negative terminal combination rivets, an insulating cover, the insulating cover, characterized in that: the wires stripped period sheath and the stripped sheath of the two wire ends formed a certain distance,The positive terminal and a negative terminal, respectively the two wire ends caulking, and placed under the insulating cover and the insulating cover.

The new structure is reasonable, good safety performance, reduce the defect rate in the production process, reducing the assembly process and time, improve production efficiency, thereby reducing costs, and increase the competitiveness of the porcelain lamp holders in the market.

Lamp holders for lamps

James produces Lamp holders for lamps for virtually every light source equipped with incandescent, fluorescent, or CFL lamps. Lampholders include incandescent medium base, and specialty sizes & fluorescent lampholders, in addition to a large line of porcelain lampholders including pulse-rated mogul-base products, and an extensive selection of devices for high-intensity lamps.
Lamp holders for lamps Specification: E27 porcelain Lamp holders with High Quality
Rating:  16A  500V  T230℃
Staring Pulse Rating: 5KV
Body: Porcelain
Terminal: Set-Screw Terminals
Rating:: 16A 500V
temperature: T230 ℃
Staring Pulse Rating: : 5KV
Body:: Porcelain
Terminal:: Set-Screw Terminals
Suitable for indoor use only
Twist-lock mounting
Use with a standard wall switch
Limited 2-year warranty
Easy pull-chain operation
Twist-lock mounting
Screws included for fast installation.

lamp holder adapter types
Lamp holder adapters purpose is to solve the existing screw and socket lampholders not generic characteristics of the utility model: a screw lamp with a socket lampholder connection constitutes a screw change socket lampholders points; a jack lamp with the the a screw lampholders join constitutes screw jack becomes sub lampholders. the utility model particularly suitable for home use. simply when existing lamps and lamp interface discrepancies the porcelain lampholders screwed one of the interface converter lampholder existing lights can be fitted using.

For the chemical reaction to take place in a halogen bulb, the filament needs to be hotter that what is needed in other types of bulbs such as incandescent bulbs. This can be a real advantage as the hotter the filament, the more powerful and brighter white light is then produced.

However the hotter the filament, the more the tungsten in the bulb is evaporating. In most cases, a denser and more expensive gas called krypton may be used, this will help slow down the evaporation.

When handling these types of bulbs, you will have to bear in mind the sensitivity of the bulb when touching it. The oils from your fingers will weaken the glass and eventually shorten the bulbs life. This is an issue in most cases, as can cause the bulb to burst when the filament burns out.

Read more related products:  GU10 porcelain lamp holders , E40 lamp holders

How many lampholders types?

How many  lamp holders types? There are mainly three  types of lamp holders, ceramic lamp holder, plastic lampholders and metal lampholders. They may be found as part of a table lamp, or as a part of a pendant light fitting. The method of connection is similar for both pendant type and table lamp, but the metal and plastic types require different considerations.

The first difference to note is that plastic fittings have no earth connection and should therefore only be connected via a two core flex. Metal fittings must always be connected via a flex with an earth wire.

lampholder types

The second consideration is that metal fittings are not suitable in some locations – the most notable of which is bathrooms. Plastic ones may be used in bathrooms, but choose the type with a longer plastic shroud which shields the components better. In practice, metal lampholders are generally only used for certain types of table lamps.

lampholders types specication as below:
B    Bayonet Collar lampholders,
E    Edison Screw Light lampholders,
F    Single Pin Type  lampholders,
G    Multiple Pin Type Light Bulb lampholders,
K    Cable Connections
P    Pre-focused Light lampholders,
R    Recessed Contact(s) lampholders,
S    Shell-type Light Bulb lampholders,
T    Telephone Slide lampholders,
W    Wedge lampholders,
X    Special Type Lightbulb lampholders,

Lampholders types of Pin or Contacts
s    Single Pin
d    Double or Bi-Pin Base Type
t    Triple Pin Base or Tri-Pin Base or 3 Pin Base
q    Quadruple Pin Base or 4 Pin Base

lampholders types

lampholders types Interior Screw Shell:
Aluminum: Aluminum is the most common and cost effective material for the socket interior.
Copper: Copper is an alternative to Aluminum where the fixture is exposed to weather. Porch fixtures should use sockets with copper screw shell and porcelain body.

lampholders types Exterior Cap and Shell:
Brass: Brass is the most common materials in a socket shell. There are different finishes in the brass shell like; polished (shiny), antique, and unfinished
Brass plated: Brass plated shells are similar to the brass shells in appearance with a cheaper price. A brass plated shell comes with similar finishes to the solid brass shell.
Nickel plated: Shiny silver finish.
Bakelite/Phenolic: These lampholders shells are thick black plastic and are typically found in less expensive lighting where the sockets are hidden by the lamp body.
Porcelain Lampholders  includes all candelabra, medium (standard) sizes, and mogul size sockets. Porcelain Lampholders are more heat resistant and typically last much longer than regular phenolic (black plastic) lamp sockets. These Porcelain Lampholders work well when used in fixtures with little or no air circulation available for the light bulb.
Porcelain: The most durable and long lasting shell, porcelain is more heat and weather resistant than any other shell type. Where the light is outside or hangs with a bulb facing down, a porcelain socket is highly recommended.

The E27 lamp holder has a porcelain body that is gray glazed with ceramic arc shield, allowing for more heat resistance. The 18 AWG, glass braid SEW-2 lugged leads are rated for 200 degrees Celsius, 600 watts and 600 volts. They are 9 inches long and stripped 1/2 inch for convenience. The socket features a durable, nickel-plated copper alloy screw shell, lamp grips, and two screws for easy installation. It is pulse-rated, so it is ideal for use with any medium base pulse-start metal halide bulbs.

Read more related products:  GU10 porcelain lamp holdersfluorescent lamp holders

LED lamp holders



What’s the fluorescent lampholder?

Fluorescent lampholder for fluorescent lamps: linear T5, T8, T12 and T2 with reduced dimensions, circular, Slimline, HO (High Output) and VHO (Very High Output) lamps with high luminous efficiency, “U” shaped lamps and compact. Fluorescent lamps are the most used lamps for the internal lighting of commercial and industrial areas.

fluorescent lampholder

LED lamp holder, commonly called “fluorescent lampholder“, LED lamp holders for fluorescent lamps: tube T5, T8, T12 and T2 with reduced dimensions, Slimline, circular, VHO (Very High Output) lamps and HO (High Output) with high luminous efficiency, “U” shaped and compact fluorescent lamps. LED tubes are the most used lamps for the internal lighting of industrial and  commercial areas.

The linear fluorescent lampholder and sockets are popular products for retrofit projects. Many of these fluorescent lampholder and sockets can be used for a variety of fixtures to accomodate almost any lamp.
Thefluorescent lampholder devices offering a variety of materials for a wide range of incandescent and fluorescent applications including electrical equipment,harnesses and light strings.
Bases include medium bi pin, end snap in, G5, G13, and single pin. Choose holders and sockets for T5s, T8s, T10s and T12s.
The fluorescent family of lampholders includes recessed double contact, slimline and medium bi-pin lampholder styles in either plunger or stationary styles.

T5 fluorescent lampholder

James ceramics produces fluorescent lampholder for virtually every light source equipped with incandescent, fluorescent, or CFL lamps. Lamp holders include incandescent medium base, and specialty sizes & fluorescent lampholders, in addition to a large line of porcelain lampholders including pulse-rated mogul-base products, and an extensive selection of devices for high-intensity lamps.

T8 tube diameter is 8 × (1/8) x 25.4 = 25.4 mm
The rest of the numbers correspond as follows:
T12 diameter of 38.1 mm
T10 diameter of 31.8 mm
A T8 diameter of 25.4 mm
T5 diameter 16 mm
T4 diameter of 12.7 mm
The T3.5 diameter 11.1 mm
T2 diameter of 6.4 mm
The lampholders specifications: E27, E40, E14

Installation is divided into bayonet, screw, Bakelite, plastic, metal, ceramic and other materials from the material is divided into usually used lampholders, such as E27 is the most popular energy-saving lamps screw lampholders and with the fluorescent lamps T8 lampholder T5 fluorescent lampholder often referred to, and the other based on the use of the environment and some the lampholders protection class up to IP68, according to the need to develop appropriate IP protection level lampholder (waterproof) at the time of purchase, usually with The lampholder used the IEC (international Electrotechnical Commission standard) safety certification.

Read more related items:  E27 lamp holdersE27 to GU10 Lamp Base adapter

What’s the lamp holder definition

How to do the lamp holder definition? the  lamp holders, also known as the Edison screw fitting, is a threaded screw base used to hold and connect a light bulb to a power source. Invented by Thomas Edison and marketed in 1909, these lamp holders typically have right-hand threads, which allow the light bulb to be screwed in clockwise and removed counterclockwise. To deter theft in public places, the threads are sometimes reversed to prevent installation in common light fixtures.

Halogen lamp holder, including a lamp holder, bulb base embedded within the structure of power connections, power connection structure includes two were positive and negative power connection cord, elastic contact piece, elastic contact piece is made from a conductive metal being bent, connect the power cable’s end includes a fixed portion and inwardly curved clip portion provided on the fixed portion projecting outwardly card blocks, lamp seat with elastic penetrated with two contacts and engages the fitting adapter through Hole, fitted through holes for engagement with the fixed portion of the slot, the card block cards connected to the card slot so that the contacts fitted stretch fitted through holes, cartridges Ministry received a chimeric pass card hole and elastic force will use its halogen lamp holder pin fixed to the fitting card access through hole.

lamp holder definition
Lamps, light fixtures, and adapters are common types of fixtures that include a lamp socket. Light fixtures as well as lamps incorporate Edison screw lamp sockets into their design not only for holding and energizing the bulb but also to take advantage of the many types of bulbs on the market that use this design. Alternate designs were implemented in the early 1900s that varied from Edison’s design but in the end, they fell out of use due to the practicality of the Edison screw.

Lamp holder definition Types
B    Bayonet Collar lamp holder,
E    Edison Screw Light lamp holder,
F    Single Pin Type lamp holder,
G    Multiple Pin Type Light Bulb lamp holder,
K    Cable Connections
P    Pre-focused Light lamp holder,
R    Recessed Contact(s) lamp holder,
S    Shell-type Light Bulb lamp holder,
T    Telephone Slide  lamp holder,
W    Wedge lamp holder,
X    Special Type Lightbulb lamp holder.

Match the lamp holder definition:
Think Size, Shape, Style, Color. Larger lamp bases require larger shades. Square bases may look better with a square shade. Victorian bases need a Victorian shade, etc. The goal is to match to style, or “mood” of the base.

socket lamp holders wholesale

Compliment the lamp holder definition:
A shade should make the base look better without competing with it for attention. Decide if the lamp base will be the star-of-the-show, or best-supporting actor. If your base is really unique, choose a simple shade to draw attention to the special features of the lamp. Hide the Switch – Your shade should just barely cover the switch. Try different sized harps or add a shade riser to fine-tune your shade fit.

Sizing Rules of Thumb
Shade height should be about 3/4 the height of the base. The bottom of the shade should be wider than the widest part of the base. Shade width should approximately equal the height from bottom of base to lamp holder definition.

Read more related products: Batten lamp holders , GU10 porcelain lamp holders , E27 lamp holders

How to do the lamp holder replacement?

How to do the lamp holder replacement? Porcelain lamp holders are made out of an electrical insulating material that can withstand high temperatures. Electrical insulators such as porcelain prevent heat and electricity from transferring from one metallic device to another. porcelain lamp holder replacement are corrosion resistant and can come with a moisture gasket that makes it suitable for outside use. Porcelain lamp holders are found in antique lamps, vintage lamps and lamps that use halogen light bulbs or heat bulbs.

Ensuring that electrical appliances are in good condition is important. And, repairing a frayed appliance cord is a good way of doing your share to ensure home safety. On the other hand, when it comes to working on electrical appliances, there can be dangers especially if you aren’t careful. For example: If you replace a lamp cord with undersized wire, overheating can occur and a fire can result.

lamp holder replacement tips

The tips of lamp holder replacement as below: Remove the screws or submit connecting the E27 lamp holders. There are actually typically two or 3 screws holding the fixture itself towards the bracket. Decrease the fixture down, exposing the wire connections. Once the fixture is down, use your hands or pliers to undo the wire nuts.

Wire nuts would be the plastic cone-looking pieces covering the ends of the place the wires come collectively, connecting the black and white wires coming from your fixture for the wires coming from your ceiling. There could possibly also be a ground wire from the fixture attached towards the metal of your junction box while in the ceiling by a screw.Connect the wires to the new fixture. The wires needs to be reattached from the exact same spots since the previous fixture, typically white to white, black to black, and ground (bare copper) to the metal junction box. Neutral wire-usually white-should be connected to neutral wire. Twist the wires two or three times with each other clockwise, or the same route you turn the wire nuts.

You may use both the old wire nuts or even the new ones supplied together with the fixture. To utilize the wire nut, location the stripped ends of each wire following to each and every other, with their points facing the identical path. Then area the wire nut over the ends and twist clockwise until the wires are secured inside the wire nut.

Use pliers to twist the ends on the wires together just before attempting to screw the wire nut on. That is primarily beneficial for houses with smaller sized gauge (thicker) wires.Do not be intimidated. With all the electricity off, the wires are harmless, and every thing is shade coded (black and white, or, outdoors the US, brown and black.).Often stick to the instructions (if any) supplied with the fixture.Usually utilize the new hardware (if any) offered together with the floodlight fixtures.
How to remove a lamp holder

Other simple mistakes can be disastrous too. As you make the electrical repairs that we suggest, be sure that all connections are tight and snug. A loose electrical connection can promote arcing and a fire can result. Lack of proper insulation between the electrical contacts and the surrounding metal socket housing can result in a short circuit that can ultimately cause a fire.
Doing these kinds of repairs are important, but you should be acutely aware of the importance of being extremely careful when working with electric appliances. It’s easy to prevent an electrical repair from backfiring once you realize what things can go wrong. So, read on and learn another trick or two.

With a lamp there are two parts that are known to wear out occasionally and which must occasionally be replaced: the cord and the socket lamp holder.

lamp holder replacement and switch is easy. Don’t try to repair just the switch. You won’t save any money, and it may even cost more. Also, it doesn’t make any difference which style switch you select. There are three basic types to choose from: pull chain, push-push, and twist.

Read more related items:  E26 porcelain lamp holders , R7S Halogen lamp holders

LED lamp holders

What’s the function of lamp holder?

What’s the function of lamp holder? Lights are often inserted in lamp holders which offer electrical connections to the lamp and help it inside the lighting fixture. The usage of lamp bases allows lights to become safely and conveniently replaced (re-lamping) in the end of life, or to transform power, color, lighting technology or and so on. There are plenty of different standards for these lamp bases, created by de facto and by many standards bodies. A basic coding system is a letter or abbreviation followed by a number.Some miniature lights have wire leads suitable for direct connection to wires; some reflector equipment and lighting have screw terminals for wire connections.

The function of lamp holder defines and limits its intended use. Porcelain insulation can withstand considerably higher operating temperatures than bakelite or other plastics. The electrical elements and wires should be made to carry the intended present plus a security aspect.

function of lamp holder supplier

Halogen bulbs also known as tungsten halogen lamps, incandescent kind. Principle is injected into the lamp halogen such as iodine or bromine gas, at high temperature, sublimation chemical action with a halogen tungsten, tungsten sublimation re-solidified in the tungsten to form a balanced circulation, to avoid premature filament breakage. Therefore live longer than incandescent halogen bulbs.
After evaporation of the tungsten atoms are moved in the direction to the glass wall, as close to the glass wall, the tungsten vapor is cooled to about 800 ℃ and halogen atoms combine to form a tungsten halide (iodide, bromide, tungsten or tungsten). Tungsten halide continues to move to the central tube, and oxidized back to the filament, as a tungsten halide is a very unstable compound and then re-heated steam into the halogen and tungsten, and the filament so that the tungsten deposited on, make up for being part evaporated. The basic principle of halogen and incandescent glow the same, are thermal radiation source.
Lamp holderr adapters are devices used to convert gas lamps, socket, outlets or parts of lamps to those of an otherwise incompatible device or system of lamp parts.The porcelain function of lamp holder is specially designed for use with shielded metal halide lamps. A lamp adapter for receiving a lamp having a conductive threaded portion and an extension with a conductive contact electrically insulated from the conductive threaded portion. The lamp holder adapter has a body with a top portion and a bottom portion.

function of lamp holder adapters

function of lamp holder adapters

The top portion has a function of lamp holder with a threaded sleeve adapted to receive the threaded portion of the lamp, a first lead electrically connected to the threaded sleeve, a cavity located with respect to the threaded sleeve so as to receive the extension of the lamp when the lamp is threaded into the threaded sleeve, a metal contact arm located within the cavity so as to make electrical contact with the conductive contact of the lamp when the lamp is threaded into the threaded sleeve, and a second lead electrically connected to the metal contact arm. The bottom portion has a threaded portion suitable for threading into a mating lamp holder, the threaded portion being electrically insulated from the top portion.

The lamp holder adapter includes a recess located within the cavity and a coil spring disposed with a lower portion within the recess and an upper portion above the recess and within the cavity, wherein the metal contact arm is located in cooperation with the coil spring so as to be biased thereon and make contact with the conductive contact of the lamp when the lamp is threaded into the threaded sleeve. The metal contact arm is located with the cavity so as not to make contact with a conductive electrical contact on a lamp not having an extension.

Read more related products:  GU10 porcelain lamp holdersE27 lamp holders

LED lamp holders

What’s the socket lamp holder?

Socket lamp holder for lighting and medical radiation lamps. A foldable the plate holder, from the socket lamp holder, the support plate by injection molding, cast molding hinged together. Use in the area corresponding to the lamp, foldable, easy to carry and transport.

Socket lamp holder and plug, which lamp base with lamp socket and wire holes, plug the light bulb socket and the electrode hole, characterized by the wall of the lamp socket through a U-shaped groove wall plug socket has a corresponding ridge. Compared with the prior art, the lamp can not easily be rotated to prevent rotation of the lamp electrode due to the advantages of short-circuiting.

Cheap socket lamp holder

After the specific lamp has been selected, the next step is to check the socket lamp holder. The lamps most commonly used in the hobby are single-ended, with a screw-type mounting E26 socket lamp holder. The size of the socket lamp holder and the threads is also described by a code, although names are more commonly used. For example, Base – E39 is commonly called a mogul base. European lamps also have a mogul base, but it is slightly different from the E-39 and is called E40 socket lamp holder. The differences are small enough that the E40 socket lamp holder lamps will work fine in the typical E39 mogul base used in the U.S.

Double-ended 150-watt lamps use the R7s socket lamp holder, while the 250-watt double-ended lamps use the Fc2 socket lamp holder. It shows the various shapes and configurations of lamps and bases, along with the restrictions on their various operating positions,Extensive line of lamp holders devices offering a variety of materials for a wide range of incandescent and fluorescent applications including electrical equipment, harnesses and light strings.

Porcelain lamp holder and bracket accepts any lamp with an E27 screw fitting, including the arcadia compact reptile lamps, as well as other types such as ceramic heat lamps. The ceramic material is resistant to high UV and heat levels. Mounted in a metal bracket that fixes to the vivarium roof or wall and which can be angled to direct the focus of the lamp.

The E27 Ceramic Lamp Holder is used for any globe with an E27 socket lamp holder, no matter whether it is CFL, LED, halogen, etc. The Standard Edison Screw type, has a 27mm diameter on the base of the globe. This E27 socket lamp holder is commonly found inside oyster lights and 240v downlights.Glazed, simple and classic porcelain lampholder. This is an Edison E27 socket with an integral locking mechanism.

socket lamp holders wholesale

High quality Edison Screw (ES) E27 socket lamp holder for ceramic heaters, emitters, metal halide, heat lamps, reflector lamps, spot lamps, incandescent and discharge lamps (HID). Suitable for use with high powered lamps of up to 1,000 watts. Made to withstand the high temperatures generated by heat basking / discharge lamps. Many applications including aquariums and vivariums.

The E27 porcelain Lamp Holder have the following product features:
Screw in lamp holder.
Ceramic lamp holder.
Gauge – 2 x 0.75mm2.
Input – 240v.
Rating – 100w max.
Length – 50mm (From tip to tip).
Lamp Holders Diameter – 41mm (Widest point – At the top).

Read more related products:  GU10 porcelain lamp holders , MR16 lamp holders

What’s the lamp accessories?

The lighting fixture lamp accessories, The Metal Halide floodlight supplied with a high output, energy efficient lamp. This floodlight is ideal for commercial and industrial lighting applications,mounted a 6 metres high, this floodlight will light up an area 20 metre x 20 metre to above street lighting level. An ideal solution for car parks or similar areas.

lamp accessories with CE

The lamp supplied has a 10,000 hour expected life, so should last more than a few years of normal use. The 36,000 lumen’s output is the equivalent of over 3 of the standard 500 Watt Tungsten Halogen floodlights, yet only consuming around 440 Watts of power.This Metal Halide version is ideal for security use with CCTV camera’s due to the excellent colour rendering producing true colours as opposed to the yellow tones emitted from SON (sodium) lamps.

Metal halide (MH) lamp accessories are often an intimidating choice for beginning reef aquarists and DIY enthusiasts alike. This article will provide basic background information on MH lighting systems, as well as an understanding of the basic vocabulary used when talking about metal halide lights, and the hardware lamp accessories that make up a complete lighting system.
After the specific lamp has been selected, the next step is to check the lamp accessories. The lamps most commonly used in the hobby are single-ended, with a screw-type mounting base. The size of the base and the threads is also described by a code, although names are more commonly used. For example, Base – E39 is commonly called a mogul base. European lamps also have a mogul base, but it is slightly different from the E-39 and is called E40 porcelain lamp holder . The differences are small enough that the E40 base lamps will work fine in the typical E39 mogul lamp holder used in the U.S. Double-ended 150-watt lamps use the RSC RX7s lamp holder, while the 250-watt double-ended lamps use the Fc2 lamp holder.

400W Metal Halide Ballast lamp accessories Details:
Ballast Operating Voltage: 120V/208V/240V/277V/480V 60Hz (5-Tap)
Amp Draw: 120V=4.10 208V=2.40 240V=2.04 277V=1.75
Ballast ANSI: M59 (probe start metal halide)
Ballast Wattage: 400 Watt
Ballast Type: HID Magnetic Metal Halide
Ballast Power Factor: 0.98
Ballast Circuit Type: CWA
Ballast Shipping Weight: 10.4 lbs
Full Factory Warranty: 5 Years
Capacitor Included: 24.0/400

LED lamp accessories: Metal packaging LED light source module, LED light-emitting diode, LED display module, LED backlight, LED light source module, LED decorative lighting products, time display, integrated infrared receiver, LED cross light flux LED light source, such terminals, sensors, converters, adapters, light boxes, acrylic accessories, plastic accessories, special lamps, electronic components, capacitors, brackets, metal, ceramic, plastic, glass, die casting, transformers, voltage regulators , wires, sockets, plugs, switches, lamp holder, lamp holders, lamp panels, fiber optic, crystal pieces, lamps, lamp posts, lamp shade. please browse http://www.lampholder.net/

Read more related products:  MR16 lamp holderGU10 porcelain lamp holders