MR16 GU5.3 Base LED Socket

MR16 GU5.3 Base LED Socket

MR16 GU5.3 Base LED Socket

Type: G5.3 plug in socket
Electric current: 2A 100W
Voltage: 250V
5KV T250
Weight(Kg): 0.02
Cable choose: silica, braided, teflon,high temperatured resistant
Available cord: 0.3 / 0.5 / 0.75 / 1mm²
Main material: Radioceramic
Contact : Nickel-plated copper

Ceramic MR16 GU5.3 Base LED Socket : maximum outside diameter of 2 inches with a multi-faceted reflector lamps in the lighting application, lamps models by the letters of the alphabet and numbers,MR is the abbreviation of the English Multifaceted (Mirror) Reflector means a plurality of reflecting Surface composition into the reflector.

The digital representation of the maximum outer size of the lamp, as a multiple of 1/8 inch, “16” indicates the lights,With the maximum outer diameter is 2 inches.

At present MR16 GU5.3 Base LED Socket line is available with a variety of cord types:
0.75m² silicon rubber braided wire 15cm,
0.5m² silicon rubber braided wire 15cm,
0.3m² silicon rubber braided wire 15cm,
0.75m² silicon rubber wire 15cm,
0.5m² silicon rubber wire 15cm,
0.3m² silicon rubber wire 15cm,
0.5m² braided wire 15cm.

led lamp-holder-light-bulb-socket-sizes
We offer modifications such as mounting brackets, reflectors and other hardware, upon your request.Generally the most common use in our lives is halogen lamp,The number of low-voltage (12V, 24V, 36V, etc.) lamps using MR16 GU5.3 Base LED Socket .

Find More lamp holder typesporcelain holder e27porcelain lamp holder, e26 lamp holder, MR16 lamp holder

light bulb adapter e27 to e14

light bulb adapter e27 to e14

light bulb adapter e27 to e14

light bulb adapter e27 to e14 converter
Change your E27 screw to E14 screw fitting
Suitable for all voltage

E27 (ES) to E14 (SES) lamp holders:
Ideal in applications where high temperatures may be produced such as Industrial Locations, Bulkheads, High Wattage Lamps as in Factories/Warehouses and for Reptiles in Vivariums & Tortoise Tables, Egg Incubation Cabinets etc.
Lamp Socket Adapter TYPES
E14 Lamp Holder is 44mm high by 33mm wide (14mm screw).
E27 Lamp Holder is 45mm high by 40mm wide (27mm screw).
Lamp holder adapter available for E27 (ES) to E14 (SES) lamps.

These are particularly suitable in applications where high temperatures may be  produced, by high bulb power or by operation in a confined space. Connection is by means of screw connectors and can be made from above or from  two sides. Holes are provided for two mounting screws or adding mounting brackets, clamps, and plates.

converts e26 medium socket to e39 mogul socket

converts e26 medium socket to e39 mogul socket

converts e26 medium socket to e39 mogul socket

E39/E26 Adapter Converter. Adapts E39 Mogul base to E26 base. Approximate size is 2.02in x 1.71in. The rated current is 10 amps. The rated voltage is 220 volts. The rated power is up to 2200 watts. CE approved.

E26 Medium Screw Base to E39 Mogul Socketlamp base Adapter. E26 Female to E39 Male.

Lamp Socket Adapter TYPES

Screw any bulb with Regular E26 base into any E39 Mogul socket light fixtures.
Using the Platinum E26 base adapter, you can use Standard E26 Medium Screw bulb to E39 Mogul fixtures.
Simply screw the lamp base adapter into your current mogul base socket and you are ready to use a medium base bulb.

E39 Mogul to E26 Medium Screw lamp base Adapter.

Ceramic Socket Adapter TYPES

 

Find More lamp holder types:12 15 19 hanging cord lamp socket, E14 lamp holder, E27 E26 bulb Socket Hanging Cord

gu10 lamp holder socket base

gu10 lamp holder socket base

GU10 lamp holder socket base

Material:Ceramic
Contact: Copper
Rated: 250V 2A T250℃
Fixing:M3 screw

1) 2A 250V T200
2) VDE CE certification
3) whte color porcelain body / yellow color porcelain body
4)Porcelain lampholder GZ10/GU10 LED lamp socket with silicone wires 15CM

GU10 lamp holders with connection box and mounting bracket
GU10 lamp holders can use for with our LED or halogen lamps.
Ceramic Lamp Holder fitting for standard GU10 lamp With mounting junction boxes
Use this to fit any GU10 bulb into a hard wire system
Socket diameter: 27mm
Wire Length: 15cm(approx)
gu10 lamp holder with bracket

Lamp holders type: gu10 lamp holder socket base
Weight:45g
Color: white
Max. wattage rating: 100W
Max. voltage: 240V.
Wire material: silicone
Wire length: About 15cm
Socket diameter: 17mm
Wire Length: 15.0cm
Wiring:. 0.5mm2 or 0.75mm2 standard silicone wire (VDE) length 15cm * 2 with ground

A standard gu10 lamp holder with 21cm tails. This product is suitable for use with fire rated downlights.New Regulation GU10 240v Mains Holder, Holder has Build in wire fixer to stop the holder’s wire coming out and heat cover stops the wires burning out by the heat, Holder has 200mm fly lead with porcelain Lamp Holders with Protected cover backing and heat cover Fitting for standard GU10 bulb cover Fitting for standard GU10 bulb.

gu10-to-mr16-lamp-socket-adapter
MR16 ADAPTER GU110
These are just the thing for converting low voltage MR16 fittings to mains voltage GU10/GZ10 fittings.  Converting your fittings will give you a much wider choice of LED and low energy lamps than are typically available for MR16 12V fittings.
No more worries about transformer compatibility!
No need to buy LED drivers!
No need to purchase whole new fittings!
Just replace existing transformers + low voltage lamp holders and choose your GU10 lamps.

E27 to MR16 Lamp Base Adapter

Ceramic lamp holders and bracket accepts any lamp with an E27 screw fitting, including the James compact reptile lamps, as well as other types such as ceramic heat lamps. The ceramic material is resistant to high UV and heat levels. Mounted in a metal bracket that fixes to the vivarium roof or wall and which can be angled to direct the focus of the lamp.

E27 to MR16 Lamp Base Adapter

E27 to MR16 Lamp Base Adapter:

Model NO: E27-MR16A
Type: light bulb adapter
Rated at 230V 4A 1500W
Weight(Kg):0.027
Temperature: 250℃ for Ceramic,220℃ for PBT,
All light socket adapter should pass 4 quality inspections before loading.
Light bulb socket adapter is available for E27 LED/CFL lamp converter MR16A.
Place of Origin: Fujian, China
E27 to MR16 Lamp Base Adapter Specification:
High at elevated temperatures
High dielectric strength
Excellent electrical resistance
Abrasion resistance
High electrical insulation

E27 to MR16 Lamp Base Adapter Application :
Electric appliance industry
Automotive industry
Mechanical industry
Engineer industry

Lamp Base Adapters

MR16 lamp holder:  “MR” means Multiface reflect, many sided reflection (cup), “16” means bulb caliber (the unit is 1 / 8 inch),the caliber of MR16 socket:16×1/8=2 inch≈50mm, “MR” is the push-in lamp holder,two pins, usually use for the halogen lamps and led lamps,it’s very convenient to install.

The high-pressure lamps is direct access to the 110 to 220 mains and low pressure lamps is to the middle followed by a high pressure to turn the low-voltage transformer (also called power). High and low voltage lamp holders does not matter, you can not take a MR16 halogen lamp holder to the E27 lamp holder, serious mismatch.

Sporting two 10-inch lead wires, the GU5.3 lamp base 12V CERAMIC BASE is rated for a maximum wattage of 750 watts and a maximum voltage of 250 volts.The halogen lamp socket has a ceramic body and a mica cover, allowing for more heat resistance.GU5.3 lamp base wire connector base plug.Fitting for any MR16 MR11 LED light or traditional halogen lamps.

Find More lamp holder types: T5 lamp holder, T8 fluorescent lamp holder, 12 15 19 hanging cord lamp socket, E14 lamp holder, E27 E26 bulb Socket Hanging Cord

 

B22 to e27 lamp light bulb base socket converter adaptor

B22 to e27 lamp light bulb base socket converter adaptor for CFL & led light bulbs,
Copper conductive piece and flame-retarded PBT,
Easy to use and allows you to keep using standard bulbs conveniently.
Product Description.

b22 to e27 lamp light bulb base socket converter adaptor
B22 to e27 lamp light bulb base socket converter adaptor specification:
Material: flame retardant & metal
Maximum support: 110V-250V, 2A
Certification: CE ROHS
Base: Plug in
Color: White
packing: 500 pcs per bag
MOQ: 1 000 pcs
Weight: 16g
Meas: 618*328*285mm
Delivery Detail: 18 days.

B22 to e27 lamp light bulb base socket converter adaptor:

1)Volts: 110/120V, 220V,240V
2)Watt: 3W-18W
3)Color temp: 2700K-6500K
4)Lifespan: 3,000/6,000/8,000/10,000hours
5)Tri-color/Mixed/Halogen
6)PBT, PC, PP,Ceramic
7)Base: E14 E27/B22
8)OEM/CE/ROHS

B22 to E27 Lamp holder Converter
More specifications of LED Lamp holder available, B22, BA15D, BA15S, E10, E11, E12, E14, E17, E26, E27, E39, E40, GU10, GU24, MR16, etc. Please feel free to contact us for more information.

B22 lamp holders, diameter 22MM lamp with two bumps card shoots for the card into the B22 lamps interface. Is the most common kind of lamp interface.

B22 lamp: the lamp holder is connected to the end of the lamp cord, interface for installing the lamp, fixed the lights in parts of the lamp so that the lamp power supply connected to the lampholder. Electric light the lamp holder naming method.

Related Symbol Meaning: B bayonet lamp cap, B behind the digital representation of the diameter of the housing, such as: B22D/25 × 26 – means with two contact pieces, a bayonet lamp holders of a diameter of approximately 22mm; total length of about 25mm, skirts diameter of about 26mm.

E27 Base Light Bulb

This ES lamp holders takes standard screw cap bulbs. Its porcelain construction makes it particularly suitable for high temperature environments such as light boxes and spotlights. Cable connection is via screw terminals and cable entry can be affected from the side.Rated at 4A, 250V.Approvals.

e27-519-2-porcelain-light-socket-lamp-holder

Here you will find Lamp holders, Cluster Sockets, Lamp Cord, Lamp Wire, Wiring Devices, Cord Switches, and Wall Plugs. We manufacture a lamp socket for any application including general lamp repair, but we also supply E27 F519 lamp holders specifically for the restoration of antique and early style fixtures including mogul lamp sockets, turn-knob porcelain lamp sockets, and socket interiors that resist high heat.

light-bulb-sockets-adaptor-bc-b22-es-e27-e14-ses-b15d-sbc-e40-ges-gu10-g9-mr16

E26 LED light bulbs and E27 LED light bulbs are Edison based LED lights that have a medium screw base. This is a standard household light bulbs base for traditional incandescent lights. The E stands for Edison and the 26 and 27 refer to the diameter of the screw E27 Base Light Bulb. In some, but not all cases an E26 LED light bulbs have a slightly smaller voltage range to include only 100VAC to 130VAC where E27 LED lights will support up to 80VAC to 240VAC voltage range. This is not universal.

Prior to the renovation, a comprehensive grasp of these knowledge is very necessary. Today to all of us, in order to provide a reference for the decoration of the LED bulb: that is, LED spherical bulb, is used to replace the traditional incandescent lamp and U type energy-saving lamps, is currently the most widely used LED lamp.

3-watt-e27-ceramic-led-light-bulbs

Now the LED ball has been able to do the whole plastic design, the price is lower, such as LED JAMES bulb lamp, 5W, 7W, 3W, 9W four watts, the use of full plastic design, compared with the previous product cost is higher, the most suitable for everyday home decoration. Bulbs to light products, we often say that the change “lighting” generally refers to the change of light source products, James ball lamp installation E27 lamp which using general E27 Base Light Bulb, or directly to the lamp holder is connected to the lamp holder.

Ceramic / Porcelain E27 Base Light Bulb:
Used For E27 (27mm Diameter Screw In) Lamps
Heat Lamps, Metal Halide Lamps, Sdium Lamps ETC With The Above Base
47mm Height x 42mm Diameter
Suitable For Poultry Chicks, Pups, Lizards and all Types of Animals

Electric Porcelain Ceramic lamp holder Types E27 F519
1. Certificate: CE
2. Rated at 4A 500V 1.5KV pulse rated
3. Main material: procelain/ceramic
4. Metal: zinc plated iron, aluminum
5. Contact type: Screw style
es-e27-lampholder-types
Type:E27 Screw
Rated at 250V 4A 660W
Material:ceramic,iron, aluminum, copper
Dimension(cm):4.9 x 3.8 x 3.8 ; 5.7 x 3.8 x 3.8
Weight(Kg):0.062
Place of Origin: Fujian, China

Single-ended compact fluorescent lamps and lamp holders

Halogen conversion compact fluorescent lamp holders, including electronic ballasts, characterized in that: conversion lamp capsule by a reflective surface of the base and a superstructure, atop the structure, with the use of energy-saving lamp structurematch and match the features with the use of compact fluorescent lamp holders, on the reflective surface of the base is provided with a plug compatible with the straight tube R7S Halogen lamp holders outlet, conversion lamp holders housing mounted electronic ballasts.

Single-ended compact fluorescent lamps and lamp holders

The electronic ballasts input terminal, an output terminal through a wire connected to the plugs, sockets, respectively. The characteristics of the utility model energy-saving lamps can be mounted directly to the original can only use a tungsten halogen lamp tube lamps.
Single-ended compact fluorescent lamps. This fluorescent lamp, fluorescent ballasts and compact fluorescent lamp holders tightly into one (electronic ballast placed inside), in addition to damaging blow, unable to remove them, it is called “compact” fluorescent. Since no external ballast, the ballast is also within driving circuit, so this is also a self-ballasted fluorescent lamp fluorescent and fluorescent activated within.

Through the entire lamp compact fluorescent lamp holders directly for other grid connection, can easily replace incandescent lamps directly.

T8 fluorescent lampholder

Trichromatic fluorescent lamps, fluorescent lamps halogen powder should not be used. Trichromatic lamp with high luminous efficiency, good color and longer life advantages. Although the price is expensive (about twice as expensive), but because of its high luminous efficiency, not only energy saving, lower operating costs; And because the number of reduced use of lights, lamps and ballasts save costs, but to make the lighting system reduce the total cost was first built.

gu10 lamp holder wickes

ITEM:gu10 lamp holder wickes
MATERIAL:CERAMIC
CONTACT:COPPER
RATED:250V 2A T250℃
FIXING:M3 SCREW

gu10 lamp holder with junction box
A standard gu10 lamp holder wickes with 21cm tails. This product is suitable for use with fire rated downlights.New Regulation GU10 240v Mains Holder, Holder has Build in wire fixer to stop the holder’s wire coming out and heat cover stops the wires burning out by the heat, Holder has 200mm fly lead with Ceramic Lamp Holder with Protected cover backing and heat cover Fitting for standard GU10 bulb cover Fitting for standard GU10 bulb, CE.

gu10 lamp holder wickes
Material: Ceramic, white or ivory color
Wire: Silicone, Teflon cable, 0.5mm2 or 0.75mm2, length as your requests
Rating: 250V, 100W/2A
Certificate: CE, VDE, RoHS
MOQ: 1000PCS
Delivery: 10-20 days after receive deposit
Other specifications available: GU10, GZ10, G4, G5.3, G6.35, G9, G12, R7S etc.
Please feel free to contact us for more information.
Why over 25 country client Choose us?
1. Professional manufacturer of lamp holder with our own factory;
2. We have excellent quality products with strict quality control process.
3. Products are produced by ourselves, which ensures high quality and lead time
4. Factory Manufacturing Enterprise Provide with you Competitive Price and superior quality
5. A wide range of low and high voltage insulators
Any questions or your detailed drawings from you are welcome and will be replied in 24 hours.

We are professional in halogen lamp holder, plastic lampholder, ceramic lampholder, porcelain lamp holder, lamp base E10, E12, E17, E26, E27, E39, E40, B22, halogen lamp holder,G4/G5.3/G6.35/G9/GZ10/GU10 etc, OEM order are Welcome!

GU10 lamp holder diagram

The GZ10 lamp holder is a universal lamp holder and takes both the GZ10 lamp and the GU10 lamp. This lamp holder is used in all fittings where the heat distributed by the dichroic reflector of the GZ10 lamp will not damage the fitting. Dichroic (sometimes called cool beam) coatings are designed to push heat back and light forward.

ITEM:gu10 lamp holder wickes
MATERIAL:CERAMIC BODY + PLASTICS CAP,Ceramic, white or ivory color
CONTACT:COPPER
FIXING:M3 SCREW
Wire: Silicone, Teflon cable, 0.5mm2 or 0.75mm2, length as your requests
Rating: 250V, 100W/2A
Certificate: CE, VDE, RoHS
MOQ: 1000PCS
Delivery: 10-20 days after receive deposit

In some fittings the heat distribution of the dichroic reflector will cause damage to the fitting and so for these fittings, a PAR16 lamp with an aluminium reflector must be used.

To make sure that the wrong lamp was not used for this fitting, the PAR16 with the aluminium reflector only comes with a gu10 lamp holder wickes. It was the lamp manufacturer’s original intention that the lamp with the dichroic reflector would not be available with a GZ10 lamp holder.

These are just the thing for converting low voltage MR16 fittings to mains voltage GU10/GZ10 fittings.  Converting your fittings will give you a much wider choice of LED and low energy lamps than are typically available for MR16 12V fittings.
No more worries about transformer compatibility!
No need to buy LED drivers!
No need to purchase whole new fittings!
Just replace existing transformers + low voltage lamp holders and choose your GU10 lamps.

Read More lamp holder types:
porcelain lamp holder, MR16 lamp holder

bc to gu10 lamp holder adaptor

bc to gu10 lamp holder adaptor,G or Bi-pin light bulb base and sockets, The “G” base type of lamp and light bulb is used to designate a “pinned” base. This can include several pin types and different numbers of pins.

Designation is by letter(s)-numbers-optional letter: The first letters include “G” followed by an optional U, X, Y or Z. Next is a number that designates the number of millimeters between the center of each pin.

GU10 lamp holder adapter manufacturer

Finally the optional final letter designates the number of pins, no letter implies 2 pins as does a d for double. Pin number designations include: s : Single, d : Double, t : Triple for 3 pins and q : Quadruple for 4 pins.
Examples include: bc to gu10 lamp holder adaptor
Suitable for LED, CFL and Halogen
Use this to fit any GU10 bulb into a hard wire system.
It allows you to plug in your LED, CFL or Halogen bulb, and attach it to the normal lighting wire.
Length of the Leads:About 8.5cm), G24q base type, or for T8 tubes G13 bi-pin.

bc to gu10 lamp holder adaptor, This adapter turns a bi pin GU10 lamp holder into a standard screw in E27 lamp holder. Allows you to install a GU10 light bulb into a medium screw in socket and adds 3 4 inch in length to the overall length of the original bulb. When you insert a GU10 based bulb into this adapter extender you lengthen the bulb by 3 4 inch and convert the base to a standard Edison medium screw in base.

Product Description: E27 to bc to gu10 lamp holder adaptor
1.250V,GU10 base lamp, E27 base holder
2.Material: PBT,Copper,Ceramic,Steady
3.Lamp Holder Adapter E27 to GU10
-Other type:
E27 to e27, e27 to e40, e27 to GU10, GU10 to e27, e14 to GU10, e40 to e27 etc.
-Certificate: CE
-MOQ: 500PCS
Body material: PBT, anti fired
Screw shell: Aluminium, Copper, Copper plated nickel.

bc to gu10 lamp holder adaptor

Aging bc to gu10 lamp holder adaptor New Regulation Bulb Connector 240v
Material: high temperature resistant ceramic
Certification: CCC certification, CE, VDE, UL certification, etc
Use all the LED lamps and lanterns of aging using GU10 interface
XXX].jpg
Ceramic lamp holder fitting for standard GU10 lamp
Use this to fit any GU10 bulb into a hard wire system
Item can use for with our LED or halogen lamps.
Socket diameter: 27mm
Wire Length: 9.5cm/3.7”(approx)

E27/GU10 bc to gu10 lamp holder adaptor

Screw type E27 to GU10 bc to gu10 lamp holder adaptor is made by the flame retardant PBT and copper material.
Can help to use original E27 lamp holder fixture by GU10 base lamp.
Vvery easily replace.
Adapter under CE standard quality.
LAMP HOLDERS MATERIAL
PBT is resistant to solvents, shrinks very little during forming, is mechanically strong, heat-resistant up to 150 °C and add in the flame retardants to make it noncombustible.