JAMES LED fluorescent lamp holders

LED fluorescent lamp holders, commonly called “fluorescent lamp holder”, lamp holders for fluorescent lamps: tube T5, T8, T12 and T2 with reduced dimensions, Slimline, circular, VHO (Very High Output) lamps and HO (High Output) with high luminous efficiency, “U” shaped and compact fluorescent lamps. LED tubes are the most used lamps for the internal lighting of industrial and  commercial areas.

T8 lamp holder G13 LED fluorescent lamp holder

LED fluorescent tubes, the appearance of the structure is the same as with traditional fluorescent tubes, fluorescent tube within the tube selected semiconductor solid-state light-emitting devices — LED light-emitting diode.
1, LED fluorescent characteristics:
1), environmental lighting, protection of the earth traditional fluorescent lamp contains a lot of mercury vapor, broken mercury vapor will evaporate into the atmosphere. LED fluorescent do not use mercury, and LED products do not contain lead, play a protective effect on the environment. The LED fluorescent recognized green lighting in the twenty-first century.
2), efficient conversion will produce a lot of heat, reduce the heat of traditional lamps, LED lamps all the energy is converted to light energy, will not cause energy waste. And file clothing does not produce a fading phenomenon.
3), quiet and comfortable, no noise LED lighting does not produce noise, a good choice for the use of sophisticated electronic equipment occasions. Suitable for the occasion of the library, office and the like.
4), soft light, protect the eyes of traditional fluorescent lamp use AC power, so will have 100-120 times per second strobe. LED lamps directly convert AC to DC, no flicker, protect your eyes.
5), no UV, no mosquito LED lamps will not produce ultraviolet light, it will not like traditional lamps, there are a lot of mosquitoes around the light source side. The interior will become more clean and sanitary and clean.
6), the voltage adjustable 80V-245V traditional fluorescent lamp to light through the high voltage rectifier release, you can not light when the voltage is reduced. LED lamps can be lit within a certain range of voltage, also adjust the brightness.
7), energy saving, longer life LED fluorescent lamp power consumption is less than one-third of the traditional fluorescent lamp life is 10 times that of the traditional fluorescent, long-term use without having to replace, reduce labor costs. More suitable for the occasion difficult to replace.
8), robust, secure, long-term use LED lamp itself is epoxy resin instead of conventional glass, more robust, secure, and even hit the floor LED is not easily damaged, can safely use.

James manufacture LED fluorescent lamp holders for virtually every light source equipped with fluorescent,incandescent, CFL lamps.The majority of LED fluorescent lamp holders for  TC lamp using PBT, a thermoplastic material. This highly heat-resistant material is responsible for the T140 temperature rating. Leading lamp manufacturers also use PBT for the fluorescent lamp holder they produce. This material harmonisation in conjunction with fatigue-free, stainless steel lamp mounting springs ensures a permanently secure lamp fit.

Fluorescent lamp holders include LED fluorescent lamp holders,incandescent medium base and fluorescent lamp holder, in addition to a large line of porcelain lampholders including pulse-rated mogul-base products, and an extensive selection of devices for high-intensity lamps, LED fluorescent lamp holders, Watts 660, Voltage 600, Connection Quickwire Push-in, Mounting Short Slide-on, Color White, Features Non-Shunted, Use With 1.68 In. High Medium Bipin Slide-on & Screw Mount, Easy to install,Standard LED fluorescent lamp holder designed for fluorescent medium bi-pin lamps.

Why LED High bay lighting replace the HPS bulb

LED High bay lighting are the economical choice due to their long life, low power consumption and low heat output. LED High bay lighting fixtures for lighting warehouses, industrial, and retail facilities. As a general guideline, divide your current Metal Halide (MH) or High Pressure Sodium (HPS) bulb’s wattage by 3 or 4 for the comparable LED wattage.

LED High bay lighting

As we all know, there are many advantages of the LED High bay lighting such as energy-saving effect, long using life, no radiation, no stroboscopic effect, no noise, soft light, wide operating voltage and a series of good characteristics. Because of these good factors, the LED flood light has been increasingly welcomed by most of consumers.  the working condition of the 400W metal halide replacement could also show the quality of the LED lamps. In the normal working condition, the temperature rising should be relatively low. On the other hand, if the conditions of heat dissipation are not good, the led light would become very weak at high temperatures. At the same time, if the led high bay light has rapid blinking in the lighting on and off, there would exist quality problem.

At 125 lumens per Watt, James’s new ultra-efficient industrial LED High Bay lighting revolutionizes the world of LED High bay lighting and is by far the most innovative LED fixture available today. With a market-leading 10 year full performance warranty, the new 26,500 lumen high bay utilizes cutting-edge optical and electrical design to provide for significantly reduced glare and superior light distribution.

Each diode is about 1/4 inch in diameter and uses about ten milliamps to operate at about a tenth of a watt. LEDs are small in size, but can be grouped together for higher intensity applications. LED fixtures require a driver which is analogous to the ballast in fluorescent fixtures. The drivers are typically built into the fixture (like fluorescent ballasts) or they are a plug transformer for portable (plug-in) fixtures. The plug-in transformers allow the fixture to run on standard 120 volt alternating current (AC), with a modest (about 15 to 20 percent) power loss.

LED High bay lighting are better at placing light in a single direction than incandescent or fluorescent bulbs. Because of their directional output, they have unique design features that can be exploited by clever designs. LED strip lights can be installed under counters, in hallways, and in staircases; concentrated arrays can be used for room lighting. Waterproof, outdoor fixtures are also available. Some manufacturers consider applications such as gardens, walkways, and decorative fixtures outside garage doors to be the most cost-efficient.

LED High bay lighting are more rugged and damage-resistant than compact fluorescents and incandescent bulbs. LED lights don”t flicker. They are very heat sensitive; excessive heat or inappropriate applications dramatically reduce both light output and lifetime. LED High bay lighting bulb holders manufacturers.

What’s the different of UV LED 280nm and 260nm

Deep UV LED 260nm features:
1. Efficient: a short period of time of up to 99.9% of the sterilization effect.
Saving: Compared with the traditional cold cathode lamps, energy-saving 80%.
Environmental protection: metal-free gas emitting technology harmful substances.
4 long life.
5 instant start.
DUV LED 260nm Note:
Do not touch the LED front, so as not to impact normal light-emitting devices.
Must make sure that the positive and negative power devices, the reverse will damage the device.
3 operation strictly in accordance with the electrical parameters of the Division I high voltage light may damage the device.
4 the DUV LED work state, should avoid close observation of the light-emitting with the naked eye.

DUV LED 260nm product applications:
Can be widely used in the field of disinfection, water, and food processing, medical equipment, curing polymers, anti-counterfeiting, military communications, etc..
UV LED 260nm photoelectric parameter table: (T = 25 ° C, IF = 20mA).

spectrum ultraviolet UV light

 280nm UV LED: Advantages: Wavelength accurate, high energy, low light decay, long life, good light efficiency, no color, spectrum ultraviolet UV light bulb holders.

Applications: Aerospace Medical Water Purification,different size specifications please refer to the specific parameters It is well known that ultraviolet light irradiation, can harm people’s eyes and skin, and UV-B, often referred to as a dorno ray or a health-ray, is assuming an environment conducive to human health, UVB produces vitamin D in the skin and to prevent skin cancer caused by the efficiency of the low UV exposure.
In addition, the combination of long-wave ultraviolet light (or by its self) UVB has become increasingly popular and effective treatment for psoriasis, vitiligo, eczema, and other skin conditions.
Wavelength 280nm UV led
Output power 500-800uW
Spectral width 12nm
Hermetically sealed TO-18 or TO-39 package
Deep UV light emitting diode, 500-800uW @ 280nm, UVTOP280

– Sterilization system to purify water, surface, and air
– Analysis of Mineral
-e prom erase.

Specifications ,Electronic components, hard disc, micro-generator, earphone, watch precision; Printing machine, DVD/CD light head, optical lens, LCD sealing curing; Medical equipment, artwork, etc

1,365nm,375nm,385nm uv led
2,Radiant flux 5mW
3,Size:3mm,5mm,8mm
4,Life span: 50000 hours+

UV LED provides excellent radiometric power in the wavelength range required for applications like curing, counterfeit verification, and medical applications. The high quality materials used in the package are specifically chosen to maximize radiometric power output, have superior UV resistance, and great reliability under monumental condition.UV glue and UV ink curing.

The 9 tips for safe of Porcelain lamp sockets

Porcelain lamp sockets through the support frame is installed in the lamp holders on the floor, including a seat body and seat cover; installation of the seat body seat cover end is on the side of the base plate lamps corresponding to the location of the poles wire perforationrespectively, with the wire opening; the bipolar wire openings respectively from the corresponding wires wear holing body, connected electrically with the metal plate and the tongue, respectively. Wires positioned in between the Porcelain lamp sockets with lamps, lamps not produce projected shadows and affect the appearance on the lamp housing. In addition, the wires are constraints between lampholders and lamps floor, away from the light bulb, a lamp floor installation of multiple lamp holders, wire away from the other bulbs and wires to eliminate the heat due to the outer wire insulation material prone to short circuits or other damage to security risks.

Everyone pay attention to fire safety for fire safety qualified households,For the safety of the lives and property of citizens to protect and maintain the economic development and social stability and peace building Jiashan, creating a harmonious environment for fire safety, September 24, Jiashan County Luoxing street in the south of the city community carried out fire safety compliance households commentary create the event of fire safety qualified assessment record activities in Jiashan County, or for the first time, by the fire brigade, street safety supervision office, police station, power supply, new homes, south of the community”s neighborhood committee composed of rating a working group divided into 7 groups of each household home fire safety, with electrical safety, gas safety inspection, and in accordance with the evaluation of a standard, door-to-door scoring. On the total score of 85 points or more standard household, awarded fire safety compliance family title, and staple uniform made of fire safety compliance household brand, reach 85 points, we must set a deadline for rectification in a home fire safety, mainly on the five elements for scoring.

First, consciously abide by state laws, regulations, rules and regulations, to maintain fire safety. Consciously care public fire prevention infrastructure, not in roads, residential corridor, the villagers Yuanba channel stacking items, sundries, parking, blockage of the passage. Two is not in the home to put gasoline, alcohol, banana water, solvent oil and other volatile flammable and explosive goods. Three is to teach children not to play with fire, not to let the child turned on the gas stove, all kinds of igniter not misplacing, placed in the reach of children not, get to the place. Four is out the door, check hidden danger is eliminated, article is put orderly, stove without fire, power supply has been disconnected, flammable and combustible materials are placed in a safe place. Five is equipped with the necessary fire extinguishing equipment in the use of electrical safety, mainly for the ten elements of the score. One is that every household must be equipped with the electric meter before the total insurance, the meter should be equipped with a total brake and leakage protection switch. Two is prohibited in any case with copper, wire instead of a fuse. The size of the fuse must be matched with the electric capacity. The three is headed for power distribution equipment can not meet the capacity requirements of household appliances, the transformation should be replaced, strictly manage. Four is the home appliances and power supply connection, must be used to open the switch or plug connection, prohibit the direct insertion of the plug into the socket hole.

Five is where required protective earthing of electrical household appliances, should adopt three prong plug and third eye Porcelain lamp sockets, not feet plug and Porcelain lamp sockets substitute, resulting in grounding neutral.

The six is the conductor and the switch, knife switch, fuse box, lamp and other connections should be solid and reliable, good contact, complete shell. Seven is the home wiring may not be directly laid in the combustible construction materials above.

The eight is for indoor wiring and electrical equipment to conduct regular inspection of insulation, the damage is found in a timely manner with electrical tape wrapping.

The nine is not to use the “three no” fake and shoddy products and household products, the use of electrical appliances in the period of use. Ten is not private pull random access wires, do not easily move the charging device. Not in the interior of the electric car, car battery charging. Household electrical appliances, the power cord is damaged, should be replaced immediately or with the use of insulation cloth wrapped in the safety of the use of gas, the main content of the five scoring. One is the gas appliance to choose the regular factory qualified products, and in the use of the use of the term. Two is the installation of gas water heater, be sure to please the professional team to regulate the installation, the use of water heaters, must maintain good indoor ventilation.

Three is equipped with liquefied gas cylinders, not stored in the living room and public places. Should be placed at the temperature of not more than 35. To prevent the high temperature and long time exposure to sunlight. In the process of using, between the cylinder and gas burner to more than 1 meters apart. Four is the liquefied gas cylinder to prevent the collision, the hard thing to knock, not close to the fire source, heat source. Shall not be used hot water, baking, burning, etc.. Cylinder can not be dumped or inverted, so as to avoid the occurrence of liquid outflow dangerous. Five is the site of the gas stove should always check, such as the valve plug, failure, hose aging, damage and other conditions should be repaired in time. If it is found that the decompression valve gland loose, handwheel closes the abnormal phenomenon should stop using, please repair personnel documented commentary create during the work, south of the community by hanging banners, fire briefing and fire blackboard newspaper publication, posted a comment on a notice and other measures, launched with great fanfare propaganda, vigorously popularize fire safety knowledge.

Why does UV Nail Lamps Safe?

UV Nail Lamps disinfection is a physical method, it does not add any substance to the water, no side effects, this is the place that it is superior to chlorination, it is usually used in combination with other substances, common joint process UV + H2O2, UV + H2O2+ O3, UV + TiO2, The germicidal lamps sanitizing effect will be better.UV Nail Lamp bulb holders.

Ultraviolet light bulbs has been widely used for curing artificial nail products over the past 26 years. UV nail lamps should really be called UVA nail lamps, because they are designed to produce UVA light, the safer form of UV light.

A typical UVA bulb for nail lamps has a lower UVA intensity than sunlight. Even so, these lamps are covered to protect your eyes. Clients need not worry since their hands are only exposed for short periods. UV nail lamps have a long history of safe use.

All UV gels solidify after they reach 50-55 per cent cure. Just because they have hardened and look cured, it doesn’t mean they’re “properly cured”. Undercured UV gel nails will be prone to staining, discoloration, lifting, breakage and increased risk for clients to develop product-related allergies. For example, if a client complains of nail beds that feel “warm” hours after the service or underneath the nail plate feels “itchy” or if the nail plate is partially separated from the nail bed, these are all possible signs of a developing skin allergy. Undercured dusts and inhibition layers are more likely to cause skin allergy; as always, direct skin contact with both should be avoided.

The exposure time of your hands to UV light during the service will range from 10 minutes to maybe 15 minutes (one hand at a time). This exposure is experienced every two to three weeks.

The average teenager works, tans, plays in the sunshine for hours a day, (hopefully) 7 days a week, mostly during the summer months when the UV intensity is at its peak. The UV light intensity is the summer in WY is similar to the UV light intensity inside the curing light.

The Professional Beauty Association (PBA), and its Nail Manufacturers Council (NMC), today reported the results of a recent study finding that UV lamp used for curing acrylic and gel nail care products are safe when used as directed (Schoon, Bryson, McConnell 2010).

This study contradicts recent Internet stories and media coverage suggesting such lamps may be unsafe. Further, the study also challenges a recent report that improperly compares nail lamps to full-body tanning beds, based on wattage, and suggests that UVA exposure levels from UV nail lamps may be unsafe. (D.F. MacFarlane and C.A. Alonso 2009).

To investigate these matters, the NMC recently engaged Lighting Sciences, Inc. to test the level of UVA and UVB light emitted by UV nail lamps. Lighting Sciences, a fully-equipped, independent scientific testing laboratory specializing in the development and testing of illumination devices, including those that emit Ultraviolet light bulbs, was asked to use standard scientific protocols to test hand exposure from UV nail lamps and compare such exposure to natural sunlight exposure. The findings of Lighting Sciences, combined with assessments from the nail industry’s leading scientists, clearly demonstrate that UV nail lamps are safe when used as directed and that the media reports and the suggestions in the MacFarlane-Alonso report to the contrary are misleading.

“The health and safety of the public and beauty practitioners is of the utmost concern for the PBA and NMC. By issuing this announcement, we hope the public will have more scientifically-based information and understand that UV nail lamps emit low levels of UV light and are safe when used as directed,” states Steve Sleeper, executive director for the PBA.

Douglas Schoon of Schoon Scientific, one of the authors of the NMC report, said, “The MacFarlane-Alonso report was premised on the erroneous assumption that the concentration of light produced by UV nail lamps is similar to that of tanning beds. In reality, UV nail lamps emit much lower concentrations. The McFarlane-Alonso observations also did not take into consideration factors such as total time spent under each type of lamp, energy use versus UV exposure, and the multiple reflections of light within the tanning bed that adds to UV exposure.”

GU10 bulb holder for led lamps

GU10 bulb holder for led lamps,
Material: Ceramic, white or ivory color
Wire: Silicone, Teflon cable, 0.5mm2 or 0.75mm2, length as your requests
Rating: 250V, 100W/2A
Certificate: CE, VDE, RoHS
MOQ: 1000PCS
Delivery: 10-20 days after receive deposit
Other specifications available: GU10, GZ10, G4, G5.3, G6.35, G9, G12, R7S etc.
Please feel free to contact us for more information.
Why over 25 country client Choose us?
1. Professional manufacturer of lamp holder with our own factory;
2. We have excellent quality products with strict quality control process.
3. Products are produced by ourselves, which ensures high quality and lead time
4. Factory Manufacturing Enterprise Provide with you Competitive Price and superior quality
5. A wide range of low and high voltage insulators
Any questions or your detailed drawings from you are welcome and will be replied in 24 hours.

GU10 bulb holder for led lamps

GU10 bulb holder:
European GU10 low voltage lamp holders and lead sets
Ceramic push in lamp holder
Suitable for use with low voltage downlights
Available in a range of lead lengths
Silicon insulated leads are crimped to lamp holder terminations

GU10 bulb holders are manufactured to the highest possible standards making them an ideal item for use with any type of GU10 bulbs. The Ceramic lamp holders use high quality wire to ensure they never fail on you and they are fully heat protected which makes them perfectly safe.

The GU10 bulb holder meet all UK safety regulations (CE and RoHs) and we offer a one year guarantee to any customer whom purchases any item from us.

LED GU10 3W/6W,With highly economical, bright, energy-efficient, eco-friendly advantages, LED GU10 3W/6W has a long service life of 50,000-plus hours, and also provides the appropriate emotional atmosphere, which is widely used in rooms, hotels, offices, supermarkets, and commercial buildings, etc.
GU10 bulb holder Features:

1.Three kinds of lamp holders:E27 lamp holder, E26, GU10
2.Easy to use, no UV, no flicker, good for eyes
3.Use 100lm/w super brightness CREE chips from USA
4.Unique patent design of heat sinking design and power
5. LED color attenuation is less than 1percent after 10,000 hours
6. High energy efficiency : In the case of same lighting effect, it can save more 80percent energy than traditional light.

GU10 bulb holder for led

GU10 bulb holder Applications: embedded LED spot lights are widely applied to indoor accent lighting for fashion stores, franchised stores, exhibition shelves, gift shops, barber shops, etc.
LUX data for reference
GU10 reference
Technical Spec
Name     High Power LED GU10
Item No.     NB-GU10-006-WHT
Light Source     Cree
Base     GU10/E27/E26
Wattage     6w
Luminance     429Lm
Color Temperature(CT)     2850K-3050K, 5000K-5650K,2630K-2850K
beam angle (with lens)     60°
Operation temperature     -20-50Celsius
operating life     >50,000hrs
Input Voltage     90~264 VAC
Frequency Range     50~60 Hz (±3)
Carton Size     36.5 *8.5*30.5(cm)
Dimension     50*81(mm)
IP Rating     IP55
P.W     0.10KG
G.W     1.008KG
packing     10pcs/carton
Warranty     2years
MOQ     100pcs

Read more related products:LED lamp holders , MR16 lamp holder

Lamp holder E27 for E27 bulbs

Lamp holder E27 takes standard screw cap bulbs. Its porcelain construction makes it particularly suitable for high temperature environments such as light boxes and spotlights. Cable connection is via screw terminals and cable entry can be affected from the side.Rated at 4A, 250V.Approvals

Ceramic / Porcelain Lamp sockets Used For E27 (27mm Diameter Screw In) Lamps
Heat Lamps, Metal Halide Lamps, Sdium Lamps ETC With The Above Lamp holder E27,
47mm Height x 42mm Diameter,
Suitable For Poultry Chicks, Pups, Lizards and all Types of Animals.

Lamp holder E27  for E27 bulbs

Electric Porcelain Ceramic lamp holder E27 F519

1. Certificate: CE
2. Rated at 4A 500V 1.5KV pulse rated
3. Main material: procelain/ceramic
4. Metal: zinc plated iron, aluminum
5. Contact type: Screw style

The James Lamp holder E27 and Bracket Set is used to mount compact lamps into your vivarium or terrarium. The Ceramic lamp holder has an E27 fitting attached to a fixing bracket. The bracket is black and has pre made holes for easy screwing onto wood. The bracket can also be carefully stuck onto a glass terrarium. The James Compact Lamp holder is a simple ‘plug and go’ solution. It comes with a power cable which has a fitted plug and switch. The holder can be positioned to direct light where it is most useful.Other Items Required: Compact Fluorescent Bulbs with E27 Screw Suitable for: Most Vivariums / Terrariums Use with James or other compact UV bulbs.

Lamp holder E27  for E27 bulbs.
factory price
timely delivery
material:Ceramic                                                                                                                      current:4A-16A                                                                                                                       rate voltage:250V-750V
metal: Copper, iron, aluminum
size: as your requested
available wire: 0.75mm2; 0.55 mm2
contact type: Screw style, receptacle style;
using:Decorate lighting and as lamps accessories.

Lamp holder E27 China supplier

Lamp holder E27 Shell material: ceramic
Metal accessories: aluminum plated yellow, iron galvanized blue zinc-plated iron, iron-plated color, iron, nickel-plated, nickel-plated brass
Ceramic lamp holder Main applications: outdoor lighting, tunnel lighting, floodlights, projection lights, searchlights, lawn lamp, buried lights, pole, road lighting, garden lights, landscape lights, docks and bridges lights, stage lighting, photography lighting, medical lamps, spotlights, cups, lamps, advertising lamps, ultraviolet lamps, mosquito lamps, infrared lamps, mining lamps, underwater lamps, explosion-proof lamps, decorative lamps, the machine fixtures.

Read more related items: b22 bulb holder E40 lamp holder

GU10 lamp holder screwfix with wire

GU10 lamp holder screwfix: G lamp types is a plug-in, U lamp part of a U-shaped, followed by numbers that light foot hole center
Distance of 10mm, GU10 is the most common, of course, there are many other lamp, such as: GX6.35, GY9.5, GY6.5 GX16D, etc.

GU10 lamp holder screwfix

Commonly screw porcelain lamp sockets: GU10 lamp holder screwfix,  MR16 lamp holder screwfix, ceramic E27 lamp holder,  E40 lamp holder, E26 lamp base.

GU10 lamp holder screwfix:  “GU” at the beginning for our daily use of the bayonet. GU: “G” means lamp holder type is a plug-in, “U” means lamp is U shape, the “10” shows the center distance of lamp foot holes (mm).

MR16 lamp holder screwfix:  “MR” means Multiface reflect, many sided reflection (cup), “16” means bulb caliber (the unit is 1 / 8 inch),the caliber of MR16 socket:16×1/8=2 inch≈50mm, “MR” is the push-in lamp holder,two pins, usually use for the halogen lamps and led lamps,it’s very convenient to install.

E27 lamp holder, E40 lamp base are refers to the ordinary screw lamp cap size, usually E27 is use incandescent lamp, E40 is bigger than e27 socket, more use for the metal halide lamp and high pressure sodium bulbs.
I have had some re-plastering and re-decorating work done in my kitchen. I had a new light fixture installed which takes 6 GU10 type bulbs. When the light fixture was first installed I placed 6 LED bulbs into it. The bulbs are Aurora branded and consume 7W of power each.

When I switch on the light it trips out the power on the Residual Current Detector (RCD) in my house. We assumed the problem was with the old wiring – perhaps it got damaged when the work was being done. So we ran a new wire to the fixture from a new light switch.
GU10 lamp holder screwfix with wire
Definitely sounds like faulty bulbs. The LEDs ought to consume less power than the halogens they are replacing (which typically consume 20-50W each in GU 10 size), and since you said you can run the fixture with all six halogens installed with no problem, your problem is not simply that six 7W LEDs were too much for your circuit in combination with all the other loads.

See if you can isolate the problem to one specific bulb out of the six by only installing one bulb at a time. It could be a short in one of the bulbs due to a manufacturing defect.

Read More lamp holder types: gu10 socket holder ,What’s the gu10 socket holder,
porcelain holder e27, MR16 lamp holder

What’s the gu10 socket holder?

Ceramic gu10 socket holder,
European low voltage gu10 socket holder and lead sets,
Ceramic push in lamp holders,
Suitable for use with low voltage downlights
Available in a range of lead lengths,
Silicon insulated leads are crimped to lamp holders terminations.

gu10 socket holders are manufactured to the highest possible standards making them an ideal item for use with any type of GU10 bulbs. The Ceramic lamp holders use high quality wire to ensure they never fail on you and they are fully heat protected which makes them perfectly safe.

gu10 socket holder for sale

These gu10 socket holders meet all UK safety regulations (CE and RoHs) and we offer a one year guarantee to any customer whom purchases any item from us.

GU10 socket holder specifications (with a U-shaped pin pitch 10MM plug-in lamp) MR16 low voltage spotlights Specifications diameter 50MM) (GU5 .3 E27 lamp specifications (which is often said thread (Edison) Base) high-voltage spotlights Specifications Overall MR16,MR11 spotlights Specifications (GU4 diameter 35mm).
gu10 socket holder is our day-to-day use of the bayonet, GU: G said the lamp type plug-in, U lamp partial rendering U-shaped behind the numbers that light foot hole center distance (mm mm) . MR16LED spotlights, MR11 MR at the beginning of the line part of the lighting small spotlights used this lamp holder, usually small spotlights two pins of the device lunch. Spotlights MR16LED, GU10 LED spotlights the lamp holder, PAR30 LED Spot Light PAR38 LED spotlights different diameter, are the world through the norms and it is called, is a light cup, spotlights called each suitable for different ceiling light lamp holder. MR16 LED spotlights refers to the maximum outer diameter of 2 inches with a multi-faceted reflector lamps in the lighting industry, MP11 is smaller than MR16 LED lamp fixtures.

gu10 socket holder types

Now talk about gu10 socket holder base, this is actually a halogen lamp holder, and MR16 are two different concepts currently on the market with common parlance the two confused, so there are many professionals may not be aware of. Gu is cylindrical contact head, 10 refers to the distance between the two contacts is 10 mm. general socket holder G5.3, E27, respectively plug pin and screw-on caps, the latter figure refers to the distance between the two pins and spiral diameter of the mouth.

The gu10 socket holder is a JAMES lamp holder and takes both the GU10 lamp. This lamp holder is used in all fittings where the heat distributed by the dichroic reflector of the gu10 lamp will not damage the fitting. Dichroic (sometimes called cool beam) coatings are designed to push heat back and light forward.

ITEM:gu10 socket holder
MATERIAL:CERAMIC BODY + PLASTICS CAP,Ceramic, white or ivory color
CONTACT:COPPER
FIXING:M3 SCREW
Wire: Silicone, Teflon cable, 0.5mm2 or 0.75mm2, length as your requests
Rating: 250V, 100W/2A
Certificate: CE, VDE, RoHS
MOQ: 1000PCS
Delivery: 10-20 days after receive deposit.

Read more related products: Gz10 Halogen Lampholder, R7s Halogen Hampholder 118mm

What’s the e27 pendant lamp holder?

The e27 pendant lamp holder takes standard screw cap bulbs. Its porcelain construction makes it particularly suitable for high temperature environments such as light boxes and spotlights. Cable connection is via screw terminals and cable entry can be affected from the side.Rated at 4A, 250V.Approvals.

E27 pendant lamp holder, a light source lamp for E27 lamp light source interface with diameter 27MM lamp Lo Wen for screwed E27 lamps interface. Is the most common kind of lamps interface.

e27 pendant lamp holder for sale

E27 pendant lamp holder: lamp holders spiral code letter E Edison threaded screw base, “E” after the number indicates lampholders thread diameter integer value, screw e27 pendant lamp holder with thread, should be in accordance with GB1005-67 “cap and e27 lamp holder thread“.

Commonly used light bulb threaded code is E27, 26.15 to 26.45 of the large diameter of the lamp, lamp trails from 23.96 to 24.26. Lamp base large diameter of 26.55 to 26.85 24.36 to 24.66 the trails of light mouth Processing methods generally rolling, efficient fast!

The porcelain lamp sockets material can be divided: the nickel-plated copper, iron, nickel-plated, nickel-plated aluminum, aluminum, copper, different materials, large price differences!

Ceramic Lamp holders specification:
Used For E27 (27mm Diameter Screw In) Lamps
Heat Lamps, Metal Halide Lamps, Sdium Lamps ETC With The Above Base
47mm Height x 42mm Diameter
Suitable For Poultry Chicks, Pups, Lizards and all Types of Animals.

e27 pendant lamp holders for sale

Electric Porcelain Ceramic lamp holder E27 F519 types:
1. Certificate: CE
2. Rated at 4A 500V 1.5KV pulse rated
3. Main material: procelain/ceramic
4. Metal: zinc plated iron, aluminum
5. Contact type: Screw style

△ts finished lamp holders cap temperature rise measured in accordance with the QB / T 2512, its temperature rise during the start of the lights and the future stability and stable time should not exceed the following values:
E27, 120 K The temperature rise and a temperature rise of 60 W (maximum power) incandescent incandescent tools used to prevent overheating. Incandescent lamps heat resistance Heat test source (HTS) lamp examination.
All tests should be used to the rated voltage. If the lamp only labeled voltage range, it should be tested with the average value of the voltage range, but the difference between the upper and lower limits of the voltage range of its average voltage value should not exceed 2.5%. For a wide voltage range of the lamp, when tested using the highest value in its range.

Read more related products: E26 lamp holders , e26 mogul socket