What’s e27 ceramic lamp holder?

High quality Edison Screw (ES) e27 ceramic lamp holder suitable for ceramic heaters, emitters, metal halide, heat lamps, reflector lamps, spot lamps, incandescent and discharge lamps (HID). Suitable for use with high powered lamps of up to 1,000 watts. Made to withstand the high temperatures generated by heat basking / discharge lamps. Many ceramic lamp holder applications including aquariums and vivariums.

e27 ceramic lamp holder for sale

E27 ceramic lamp holder with cord using screw in terminal blocks for wires of 0.5-2.5mm2? suitable for a range of different wire types including multi-stranded and solid core. The ceramic body is made from steatite for high durability.

There are two 4mm holes on the base for mounting using M3 fixing. 4A 250V AC rating to suit more demanding applications requiring a start up load of up to 5KV. Suitable for installations up to 230 degrees celcius. Carries VDE (European) approval and complies with RoHS.
Export Markets:South Africa, Europe, Singapore, Thailand, Egypt, U.K and various Middle East and Gulf nations.

Screw e27 ceramic lamp holder. The market I am afraid the few retail lampholders for replacement. If the bulb does not light mouth contact parts are not damaged, you might just lose elasticity, you can cut off the power supply components in contact with a screwdriver slightly cocked, you can resume contact performance.e27 ceramic lamp holder is about 30-35mm.

E27 ceramic lamp holder for sale supplier

F519-8 e27 ceramic lamp holder,Cooper Wiring Porcelain Lamp socket: Lamp holder fixture sockets porcelain – keyless medium base – incandescentScrew terminals are backed out. Hickeys and nipples have 1/8 inch thread for mounting on standard fixture, 0.44 inch bracket height, 1.88 inch overall height. 660 watt, 250 volt. Temperature rating of -40 to 65 degrees C. Interiors have removable turn knobs.
1. Aluminum plated copper screw shell, iron plated copper center contact, zinc alloy terminal
2. Ron plated copper screw shell, iron plated copper center contact, zinc alloy terminal
3. Iron plated zinc screw shell, stainless center contact, zinc alloy terminal
4. Full Copper metal parts
5. Full copper plated nickel metal parts
6. Aluminum plated copper screw shell, copper center contact, zinc alloy terminal
7. Iron plated zinc screw shell, iron plated copper contact, zinc alloy terminal
8. Aluminum plated copper screw shell, stainless center contact, zinc alloy terminal
9. Aluminum plated copper screw shell, copper centre contact, copper terminal
10. Ron plated nickel screw shell, iron plated nickel center contact, zinc alloy terminal.

Read more related products:  GU10 led lamp holders , e27 lamp holder cord white , E27 lamp holder chain

How to choose the keyless lamp holders?

The keyless lamp holders takes standard screw cap bulbs. Its porcelain construction makes it particularly suitable for high temperature environments such as light boxes and spotlights. Cable connection is via screw terminals and cable entry can be affected from the side.Rated at 4A, 250V.Approvals.

keyless lamp holders supplier

Compact lamp with a lamp bulb which is characterized by: lamp shade formed by the different shapes of the upper and lower inner and outer, groups of different kinds of color light, if they are arranged in a V-shaped cross-uniform contact, the lamp wall is circular, conical, oval and a bump prism reflector plane condenser, internal and external, specially assembled lamp is separated into its special light mouth tightened in the same time so that the wire with a plug connector, insert the screw lamp holder and the controller is connected with inserted to change light bulbs light bulbs that eight colors can be applied to a single device or several devices synthesis, can also be made of a variety of different types of light bulbs, and all the parts into a whole or to a separate component of color lights for different levels of the industry sectors.

These white glazed-porcelain keyless lamp holders are 4kv & 5kv starting pulse rated for high-pressure sodium lamps up to 400 watts. Features include leads which are spot welded to nickel-plated, copper alloy screw shell and center contact. Corrosion resistant coil spring under center contact.

High quality Edison Screw (ES) E27 keyless lamp holders suitable for ceramic heaters, emitters, metal halide, heat lamps, reflector lamps, spot lamps, incandescent and discharge lamps (HID). Suitable for use with high powered lamps of up to 1,000 watts. Made to withstand the high temperatures generated by heat basking / discharge lamps. Many applications including aquariums and vivariums.

keyless lamp holders

Wire termination is from the base of the keyless lamp holders using screw in terminal blocks for wires of 0.5-2.5mm2? suitable for a range of different wire types including multi-stranded and solid core. The ceramic body is made from steatite for high durability.

There are two 4mm holes on the base for mounting using M3 fixing. 4A 250V AC rating to suit more demanding applications requiring a start up load of up to 5KV. Suitable for installations up to 230 degrees celcius. Carries VDE (European) approval and complies with RoHS. Export Markets:South Africa, Europe, Singapore, Thailand, Egypt, U.K and various Middle East and Gulf nations.

We love traditional materials and one of those that’s been slightly off the radar for a while now is porcelain. We’ve seen some porcelain lamp holders, mainly for heat lamps and that kind of thing but they mostly had a rough texture.

Read more related lamp holders:  E39 lamp holdersB22 porcelain lamp holders , E40 lamp holders

What’s the festoon lamp holders?

Festoon lamp holders are made from “bakelite”,the material chemical name is called phenolics, is first put into industrial production in the plastic variety. It has high mechanical strength, good insulation, heat-resistant, corrosion-resistant, therefore commonly used in the manufacture of electrical materials, such as switches, lamp holders, headset, phone cases, instrument case, “Bakelite” named . It is the advent of the industrial development of great significance.

festoon lamp holders

Edison Screw (SES) E14 festoon lamp holders. Our range includes many types of E14 festoon lamp holders, but if you cannot find what you need please contact us. Suitable as replacements for most applications or for new projects. Most items carry full approvals of CE and VDE and / or UL approval and all are compliant with RoHS.Supplied with a half threaded barrel, 35mm lamp shade ring, seperate internal electrical connection and cap.

This version features a seperate internal part for the electrical connection. Connection is made using traditional screw terminal blocks to allow for secure connection. This is therefore suitable for use with all wire types including solid core wires and multi strand wires. 2A 250V AC rating to suit most standard applications.
Festoon lamp holders Packing : 1) Usual export saving packing : 42*20.5*42CM 100PCS a small box ,400PCS in a strong carton 2) Also the mark designed by customers requirement,different packing is different price. ITEM:F202 (3014) NW.: 12.5 KGS GW: 13.5 KGS

E14 Festoon lamp holders size:38*38*29 CM
1)Rated Current:1A.
2)Rated Voltage:250V.
3)Type:screw.
4)REMAR: E14.
5)Material:bakelite.
6)Packing:1200pcs/carton.
7)G.W./N.W.:22/20KGS.
8)MEASUREMENT(CM):56X33X25.
9)Min Order:12000PCS.

festoon lamp holders China supplier

the ceramic lamp holder is not easy to transport, it’s fragile easy to break, it’s heavy, the cost of transportation is high. Bakelite lamp holder is not environmentally friendly, Unrecyclable. High temperature resistant 180-250 and expensive cost, High temperature porcelain lamp holder, ceramic lamp holder temperature higher than 3000 degrees, festoon lamp holders temperature of 180 degrees, 10 minutes to burn out.

Generally speaking,the incandescent lamp and metal halide bulb are direct heat radiation lamps, a 220 volt incandescent lamps common maximum power of 300 watts, metal halide lamp can up to 2000 watts, the light bulb is at very high temperatures! So the lamp holders must high temperature resistant! But commonly used festoon lamp holders in the bulbs power more than 150 Watt.

Ceramic Halogen Lamp Holder supplier

Additional lamp shade rings can be purchased seperately, as can two types of pendant cord grips. Please see the accessories tab for current accessories. browse our web: http://www.lampholder.net/

Read more related products:  GU10 porcelain lamp holders , MR16 lamp holders

R7S lamp holders

What’s the dichroic lamp holder?

Ceramic Halogen dichroic lamp holder:
European GX5.3 low voltage dichroic lamp holder and lead sets,
Ceramic push in dichroic lamp holder,
Suitable for use with low voltage downlights
Available in a range of lead lengths
Silicon insulated leads are crimped to lamp holder terminations.

MR16 G5.3 dichroic lamp holder

Round Steatite body:
Copper, nickel-plated double wipe contacts with
stainless steel reinforcing springs
Standard lead wires are 18 AWG SEW-1 (SF1)
200°C, 12″ long, stripped 12″
Multi-pin base provides maximum flexibility
and reduces inventory costs
Mounts using 2 screws in recessed nests through
Halogen socket body
Other wire types, lengths and terminations are
available upon request, contact the factory.

Mr16 dichroic lamp holder, commonly called halogen socket, are used to secure bulbs in ceiling lighting fitting and to provide a safe, reliable connection to the electrical power source. FURI produce ceramice MR16 dichroic lamp holder for high temperature applications that include mainly Tungsten Halogens, Incandescent and  HID bulb types. FURI provides CE & UL certified halogen socket for many diverse product applications. Some of them include: interior and exterior building illumination, Stage, studio and film, store displays and large areas for general illumination.

Ceramic MR16 dichroic lamp holder: maximum outside diameter of 2 inches with a multi-faceted reflector lamps in the lighting industry, lighting models by the letters of the alphabet and numbers,MR is the abbreviation of the English Multifaceted (Mirror) Reflector means a plurality of reflecting Surface composition into the reflector. The digital representation of the maximum outer size of the lamp, as a multiple of 1/8 inch, “16” indicates the lights,With the maximum outer diameter is 2 inches.

Standard porcelain G5.3 dichroic lamp holder:
With heat resistant flying Leads
Approximately 300mm long
12mm spacing between each fixing hole
Can be used with standard low voltage MR16 downlighters.
Comes with 12v connector block.
Porcelain lampholders MR16 MR11 12V Low Voltage Lampholders – Wire Connector dichroic lamp holders for Lamp Light Recessed Downlights.

dichroic lamp holder types

A standard GU10 dichroic lamp holder with 21cm tails. This product is suitable for use with fire rated downlights.New Regulation GU10 240v Mains Holder, Holder has Build in wire fixer to stop the holder’s wire coming out and heat cover stops the wires burning out by the heat, Holder has 200mm fly lead with Ceramic Lamp Holder with Protected cover backing and heat cover Fitting for standard GU10 bulb cover Fitting for standard GU10 bulb, CE

Dichroic lamp holder Specifications:
1.Color: More than 7 color
2.Material:plastic,bakelite,porcelain
3.Working Voltage:110-660v
4.Current: <16A
5.Customized:yes

Dichroic lamp holder Wire selection:

0.5m2 braided wire 15CM
0.3m2 silicon rubber wire 15CM
0.5m2 silicon rubber wire 15CM
0.75m2 silicon rubber wire 15CM
0.3m2 silicon rubber braided wire 15CM
0.5m2 silicon rubber braided wire 15CM
0.75m2 silicon rubber braided wire 15CM

Read more related products: R7S Halogen lamp holdersLED lamp holders

What’s the porcelain lamp socket?

Porcelain lamp socket is made out of an electrical insulating material that can withstand high temperatures. Electrical insulators such as Porcelain prevent heat and electricity from transferring from one metallic device to another. Replacement porcelain lamp sockets are corrosion resistant and can come with a moisture gasket that makes it suitable for outside use. porcelain lamp socket is found in antique lamps, vintage lamps and lamps that use halogen light bulbs or heat bulbs.

porcelain lamp socket wholesale

The James porcelain lamp socket is a high quality sturdy fitting for ceramic heat emitters and heat lamps that gives you the peace of mind that the fitting isn’t going to melt. This product, from Swell’s own range of expertly sourced gear, provides top quality at a bargain price.

1. Inside material: brass
2. Outside material: top-quality porcelain
3. Certification: CE, UL
4. Easy installation and good operation
5. With competitive price and high quality
6. Enjoy a good reputation in the world market.

E27 F519-8 porcelain lamp socket,Cooper Wiring porcelain lamp socket: Lamp holder fixture sockets porcelain – keyless medium base – incandescentScrew terminals are backed out. Hickeys and nipples have 1/8 inch thread for mounting on standard fixture, 0.44 inch bracket height, 1.88 inch overall height. 660 watt, 250 volt. Temperature rating of -40 to 65 degrees C. Interiors have removable turn knobs.

Suitable for GU10 type ceiling light, halogen lamp, LED bulbs, low voltage lamp and more. This GU10 porcelain lamp socket is equipped with cable wires for easy connection.

E40 porcelain lamp socket for ceramic heaters, emitters, metal halide, heat lamps, grow lamps, reflector lamps, spot lamps, incandescent and discharge lamps (HID). Suitable for use with high powered lamps of up to 1,000 watts. Made to withstand the high temperatures generated by heat basking / discharge lamps. Many applications including aquariums and vivariums.

Porcelain lamp holders types

Our factory is a professional manufacturer and exporter of electrical goods(like wall porcelain lamp sockets,porcelain insulators,lampholders and so on),integrating design,manufacture,and export for more than ten years.We have success in some of the Middle east countries and African,Europe,South America countries.any OEM and ODM service for the switches ,lampholds and plugs,mcb are offered.if you are interested in our products,please check more detailed information on our website or contact us directly .any OEM and ODM program just contact with us .we will try our best to support your business.
The porcelain lamp sockets comes with approximately two metres of cable and is ready fitted with a three pin plug, so all you have to do is install your chosen screw fitting heat lamp, such as a james Ceramic Heat Emitter, and relax.

Read more related products:Floodlight fixtures E39 lamp holder

What’s the fluorescent light lamp holders?

The linear fluorescent light lamp holders and sockets are popular products for retrofit projects. Many of these fluorescent light lamp holders and sockets can be used for a variety of fixtures to accomodate almost any lamp.

The fluorescent light lamp holders devices offering a variety of materials for a wide range of incandescent and fluorescent applications including electrical equipment,harnesses and light strings. Bases include medium bi pin, end snap in, G5, G13, and single pin. Choose holders and sockets for T5s, T8s, T10s and T12s. The fluorescent light lamp holders includes recessed double contact, slimline and medium bi-pin lampholder styles in either plunger or stationary styles.

fluorescent light lamp holders

James produces fluorescent light lamp holders for virtually every light source equipped with incandescent, fluorescent, or CFL lamps. Lampholders include incandescent medium base, and specialty sizes & fluorescent lampholders, in addition to a large line of porcelain lampholders including pulse-rated mogul-base products, and an extensive selection of devices for high-intensity lamps.

fluorescent light lamp holders manufacturing process of the lamp positioning means of the housing, which comprises the working of the table, under the pressure of components, the controller and the drive, the lower press assembly is provided with the compression structure, the cylinder, the piston, the rack, positioning axis;the lower end of the bench provided fixture; match of said cylinder and piston, the piston with the rack is fixed, said shaft with the rack vertical positioning, positioning axis fixed gear engaging said gear rack, said positioning shaftfixed positioning of head, the positioning head has a two and the cap through hole of the housing end portion matches the positioning pin, said positioning pin with respect to the positioning head can be elastically stretchable; said controller, respectively, with a drive, the compressionThe structure, the cylinder is electrically connected; said drive table drive connection.

The utility model using linear cylinder instead of the rotating cylinder, to reduce the the fluorescent light lamp holders manufacturing cost of equipment and manufacturing technology requirements.

linear fluorescent light lamp holders

T8 tube diameter is 8 × (1/8) x 25.4 = 25.4 mm
The rest of the numbers correspond as follows:
T12 diameter of 38.1 mm
T10 diameter of 31.8 mm
A T8 diameter of 25.4 mm
T5 diameter 16 mm
T4 diameter of 12.7 mm
The T3.5 diameter 11.1 mm
T2 diameter of 6.4 mm
The lampholders specifications: E27, E40, E14

Installation is divided into bayonet, screw, Bakelite, plastic, metal, ceramic and other materials from the material is divided into usually used lamp holders, such as E27 lamp holder is the most popular energy-saving lamps screw lampholders and with the fluorescent lamps T8 fluorescent light lamp holders, T5 fluorescent light lamp holders often referred to, and the other based on the use of the environment and some the lampholders protection class up to IP68, according to the need to develop appropriate IP protection level lampholder (waterproof) at the time of purchase, usually with The lampholder used the IEC (international Electrotechnical Commission standard) safety certification.

Read more related products:  Halogen lamp holders , GU10 porcelain lamp holders , MR16 lamp holders

What’s the screw bulb lamp holder?

Screw bulb lamp holder including an insulator , a metal shell threaded conductive metal cap , the metal housing is open at both ends of the thread , with external threads at the top of the metal injection molding screw insulator housing , an insulator disposed on the center line lamp lead wire outside the through hole , a conductive metal end cap is open and the other end closed cylinder open end face of the insulator has a conductive metal cap with an annular groove adapted to the wire from the wire hole after piercing the side of the bend, the metal in contact with the conductive cap , a conductive metal tube wall cap insulator is inserted in the annular groove .

E27 screw bulb lamp holder
Screw caps is a kind of lamp , the lamp advantage is that you can screw firmly fixed in the socket , threaded connections. Bulb and socket for precision machining of lower than bayonet . The disadvantage is that the installation must be in accordance with the requirements of the two cable outlets.Early screw cap style is relatively simple, easy to rust, and now through continuous innovation , nice, long life , efficacy and more convenient installation.

E27 screw bulb lamp holder. The market I am afraid the few retail lampholders for replacement. If the bulb does not light mouth contact parts are not damaged, you might just lose elasticity, you can cut off the power supply components in contact with a screwdriver slightly cocked, you can resume contact performance.E27 porcelain lamp holder is about 30-35mm.
( 1 ) screw bulb lamp holder type, aperture size, operating voltage and current must , in line with the cap capacity specifications ; ( 2 ) screw bulb lamp holder must comply with the environmental conditions of use ; ( 3 ) screw bulb lamp holder appearance should be clean , complete, no mildew , bubbles, cracks and other defects detrimental to insulation ; ( 4 ) screw bulb lamp holder insulation resistance should be less than 2MΩ; (5 ) tighten the bulb, staff should contact with live parts within the lamp soket  or porcelain lamp holder .

screw bulb lamp holder types

Semiconductor light-emitting diode light bulbs with shade, cover, light assembly, screw lamp holder. Light-emitting module having a circuit board, are mounted on the circuit board in series with the at least two vertical light emitting diode emitting diode set, the light emitting diode in series with a resistor, the light emitting component and the negative electrode lead, respectively, and the screw lead the mouth of the bottom electrode and the cap screw cap wall connected to the electrodes, characterized in that said light emitting diode set in the number of light emitting diodes are at least two different height positions. Thus, the emission angle of light increases, the brightness uniformity, brightness enhancement, effectively overcome the shortcomings of light emitting diode way. After testing, it works reliably. Furthermore, the housing has a side wall of the screw and the negative lead on its inner screw cap connected to it with a more reliable one card line groove. Thus, by tightening screw allows the negative lead screw bulb lamp holder to connect, its work is more reliable.

The bayonet and screw bulb lamp holder belong to the building the field of electrical equipment from the cavity cylindrical insulating housing with insulating spacers threaded on the packages in the separator side of the housing within the U-shaped metal tube, fitted on the spacerlong metal contact plate, installed in one side of the bottom of the threaded tube of the metal short-contact piece, the installation of two metal post on the other side of the spacer as the main component.

At both ends of the threaded pipe diameter from the tube the rim wall down to open two symmetrical L-shaped bulb hanging slot open U-shaped notch on the bottom of the threaded pipe, the gap at the outcrop partition, partition coat has long contact piece, long, short contact piece is connected with the metal terminal on the other side of the spacer, respectively, and two terminal respectively connected with one pole of the power supply. The generic lamp holders can be convenient comfortable tipping bayonet, screw incandescent bulbs or fluorescent energy-saving lamp.

Read more related products:  B22 porcelain lamp holdersE40 lamp holders

What’s the edison lamp holder?

An edison lamp holder, also known as the Edison screw fitting, is a threaded edison lamp holder used to hold and connect a light bulb to a power source. Invented by Thomas Edison and marketed in 1909, these sockets typically have right-hand threads, which allow the light bulb to be screwed in clockwise and removed counterclockwise. To deter theft in public places, the threads are sometimes reversed to prevent installation in common floodlight fixtures.
Most standing lamps consist of a body, a base where the cord enters, a harp to support the shade, and an edison lamp holder, which receives the cord at one end and the lightbulb at the other. The cord usually runs through a hollow threaded rod from the base to the edison lamp holder.

edison lamp holder e27 lamp holder
edison lamp holder, Cluster Sockets, Lamp Cord, Lamp Wire, Wiring Devices, Cord Switches, and Wall Plugs. We stock a lamp socket for any application including general lamp repair, but we also supply lamp sockets specifically for the restoration of antique and early style fixtures including mogul lamp sockets, turn-knob porcelain lamp sockets, and socket interiors that resist high heat.
Lamps, light fixtures, and lamp holder adapters are common types of fixtures that include a lamp socket. Light fixtures as well as lamps incorporate Edison screw lamp sockets into their design not only for holding and energizing the bulb but also to take advantage of the many types of bulbs on the market that use this design. light  designs were implemented in the early 1900s that varied from Edison’s design but in the end, they fell out of use due to the practicality of the Edison screw.

Edison lamp holder including an insulator , a metal shell threaded conductive metal cap , the metal housing is open at both ends of the thread , with external threads at the top of the metal injection molding screw insulator housing , an insulator disposed on the center line lamp lead wire outside the through hole , a conductive metal end cap is open and the other end closed cylinder open end face of the insulator has a conductive metal cap with an annular groove adapted to the wire from the wire hole after piercing the side of the bend, the metal in contact with the conductive cap , a conductive metal tube wall cap insulator is inserted in the annular groove .

edison lamp holder types

Screw caps is a kind of lamp , the lamp advantage is that you can screw firmly fixed in the socket , threaded connections. Bulb and edison lamp holder for precision machining of lower than bayonet . The disadvantage is that the installation must be in accordance with the requirements of the two cable outlets.Early screw cap style is relatively simple, easy to rust, and now through continuous innovation , nice, long life , efficacy and more convenient installation.
( 1 ) edison lamp holder types, aperture size, operating voltage and current must , in line with the cap capacity specifications ; ( 2 ) edison lamp holder must comply with the environmental conditions of use ; ( 3 ) Base appearance should be clean , complete, no mildew , bubbles, cracks and other defects detrimental to insulation ; ( 4 ) Base insulation resistance should be less than 2MΩ; (5 ) tighten the bulb, staff should contact with live parts within the edison lamp holder or porcelain lamp holder .

Read more related products:  E27 Light Bulb BaseE14 porcelain lamp holders , Porcelain lamp holder with pull chain

Light bulb breaks in lamp holder

Led light bulbs is popular in our daily life, some time the light bulb breaks in lamp holder, how to deal with it? Remove the screws or submit connecting the lamp holder. There are actually typically two or 3 screws holding the fixture itself towards the bracket. Decrease the fixture down, exposing the wire connections. Once the fixture is down, use your hands or pliers to undo the wire nuts.

Light bulb breaks in lamp holder

Wire nuts would be the plastic cone-looking pieces covering the ends of the place the wires come collectively, connecting the black and white wires coming from your fixture for the wires coming from your ceiling. There could possibly also be a ground wire from the fixture attached towards the metal of your junction box while in the ceiling by a screw. Connect the wires to the new fixture.

The wires needs to be reattached from the exact same spots since the previous fixture, typically white to white, black to black, and ground (bare copper) to the metal junction box. Neutral wire-usually white-should be connected to neutral wire. Twist the wires two or three times with each other clockwise, or the same route you turn the wire nuts.

When the light bulb breaks in lamp holder , the solution as below: You may use both the old wire nuts or even the new ones supplied together with the fixture. To utilize the wire nut, location the stripped ends of each wire following to each and every other, with their points facing the identical path. Then area the wire nut over the ends and twist clockwise until the wires are secured inside the wire nut.

Use pliers to twist the ends on the wires together just before attempting to screw the wire nut on. That is primarily beneficial for houses with smaller sized gauge (thicker) wires.Do not be intimidated. With all the electricity off, the wires are harmless, and every thing is shade coded (black and white, or, outdoors the US, brown and black.).Often stick to the instructions (if any) supplied with the fixture.Usually utilize the new hardware (if any) offered together with the fixture.

bulb breaks in lamp holders

Most standing lamps consist of a body, a lamp holder where the cord enters, a harp to support the shade, and lamp holders, which receives the cord at one end and the lightbulb at the other. The cord usually runs through a hollow threaded rod from the base to the lamp holder.

When a lamp won’t work and you know the bulb is OK, check the cord for damage. If the insulation is worn and cracked, replace the entire cord (see Rewiring Lamps, Related Projects). If the cord is OK, the problem is most likely in the halogen lamp holder.

Most lamps have felt bases that must be removed before repairing the lamps. Remove the felt by paring it off with a utility knife. After the repair, reapply the felt with white glue.

Read more related items:  E27 to GU10 Lamp Base adapter , LED lamp holders , E27 lamp holders

What’s the E27 bulb lamp holder?

A E27 bulb lamp holder, also known as the Edison screw fitting, is a threaded screw lamp holder used to hold and connect a light bulb to a power source. High quality Pendant Edison Screw (ES) E27 bulb lamp holder for ceramic heaters, emitters, metal halide, heat lamps, reflector lamps, spot lamps, incandescent and discharge lamps (HID). Suitable for use with high powered lamps of up to 1,000 watts. M10 (10mm) cable entry. Made to withstand the high temperatures generated by heat basking / discharge lamps. Many applications including aquariums and vivariums.

E27 bulb lamp holder

The E27 bulb lamp holder takes standard screw cap bulbs. Its porcelain construction makes it particularly suitable for high temperature environments such as light boxes and spotlights.ES bulb lamp holder fixing holes for use with standard GLS and heat lamps. (For use in damp and moisture laden areas such as Vivariums, green houses, cow and chicken sheds etc.) Cable connection is via screw terminals and cable entry can be affected from the side.Rated at 4A, 250V.

Porcelain Lamp holder Character:
– Used For E27 (27mm Diameter Screw In) Lamps
– Heat Lamps, Metal Halide Lamps, Sdium Lamps ETC With The Above Base
– 47mm Height x 42mm Diameter
(This Porcelain Lampholder is NOT suitable for 70W SON or Metal Halide discharge lamps – pls. e.mail our technical sales for more information).

The Edison screw fitting is a system of screw mounts used for light bulbs, developed by Thomas Edison and licensed starting in 1909 under the Mazda trademark. The bulb has a threaded metal base which screws into a matching E27 bulb lamp holder.
E27 bulb lamp holder

E27 Ceramic lamp holder and bracket accepts any lamp with an E27 screw fitting, including the James compact reptile lamps, as well as other types such as ceramic heat lamps. The ceramic material is resistant to high UV and heat levels. Mounted in a metal bracket that fixes to the vivarium roof or wall and which can be angled to direct the focus of the lamp.

E27 bulb lamp holder Specification:
High at elevated temperatures
High dielectric strength
Excellent electrical resistance
Abrasion resistance
High electrical insulation.

E27 bulb lamp holder Application :
Electric appliance industry
Automotive industry
Mechanical industry
Engineer industry.

Read more related products: GU10 porcelain lamp holders, E40 lamp holders