240v gu10 lamp holder

240v gu10 lamp holder specifications (with a U-shaped pin pitch 10MM plug-in lamp) 240v gu10 lamp holder voltage spotlights Specifications diameter 50MM) (GU5 .3 E27 lamp specifications (which is often said thread (Edison) Base) JCDR high-voltage spotlights Specifications Overall MR16MR11 spotlights Specifications (GU4 diameter 35mm)
GU10 lamp holder is our day-to-day use of the bayonet, GU: G said the lamp type plug-in, U lamp partial rendering U-shaped behind the numbers that light foot hole center distance (mm mm) . GU10 LED spotlights, MR11 MR at the beginning of the line part of the lighting small spotlights used this lamp holder, usually small spotlights two pins of the device lunch. Spotlights GU10 LED spotlights the lamp holder, PAR30 LED Spot Light PAR38 LED spotlights different diameter, are the world through the norms and it is called, is a light cup, spotlights called each suitable for different ceiling light lamp holder. MR16 LED spotlights refers to the maximum outer diameter of 2 inches with a multi-faceted reflector lamps in the lighting industry, MP11 is smaller than MR16 LED lamp fixtures.

240v gu10 lamp holder

Now talk about 240v gu10 lamp holder, this is actually a lamp holder, and GU10 are two different concepts currently on the market with common parlance the two confused, so there are many professionals may not be aware of. Gu is cylindrical contact head, 10 refers to the distance between the two contacts is 10 mm. general lamp holders G5.3, E27 lamp holder, respectively plug pin and screw-on caps, the latter figure refers to the distance between the two pins and spiral diameter of the mouth. (Note G5.3, GU10, many people no longer distinguish the difference between the two.)

When I switch on the light it trips out the power on the Residual Current Detector (RCD) in my house. We assumed the problem was with the old wiring – perhaps it got damaged when the work was being done. So we ran a new wire to the fixture from a new light switch.

Definitely sounds like faulty bulbs. The LEDs ought to consume less power than the halogens they are replacing (which typically consume 20-50W each in GU 10 size), and since you said you can run the fixture with all six halogens installed with no problem, your problem is not simply that six 7W LEDs were too much for your circuit in combination with all the other loads.

240v gu10 lamp holder

240v gu10 lamp holder, normally named halogen light socket, are applied to safe bulbs in ceiling lighting fitting and to provide a secure, trusted connection towards the electrical energy supply.

JAMES make 240v gu10 lamp holder for higher temperature applications that consist of mostly Tungsten Halogens, Incandescent and HID bulb sorts. FURI provides CE & UL
certified 240v gu10 lamp holder for many diverse product applications. Some of them consist of: interior and exterior building illumination, Stage, studio and film, store displays and large areas for general illumination.

240v gu10 lamp holder: G lamp types is a plug-in, U lamp part of a U-shaped, followed by numbers that light foot hole center Distance of 10mm, GU10 is the most common, of course, there are many other lamp, such as: GX6.35, GY9.5, GY6.5 GX16D, etc.

Read more relative products:  R7S lamp holder , T8 fluorescent lamp holder

Porcelain lamp socket types

Lamp holder E27, E14, E12, E26 are very popular in our daily life, “E” at the beginning is usually: screw socket, GU10 Gu at the beginning for our daily use of the bayonet. GU:G said lamp type is a plug-in,  you said lamp presents a U shape, the numbers behind said lamp foot hole center distance (mm, mm).

Porcelain lamp holder is constructed of ceramic, screw shell, contact .
Body material Porcelain  ceramic
Screw shell Nickel-plated copper 0.5mm thickness, Aluminum plated copper,
Contact  Nickel-plated copper 0.8mm thickness, Stain steel, Iron plated copper.
Available cord 0.75mm2, 0.5mm2.

E27 lamp holder construction

How to choose the right porcelain lamp socket, the tips as following:
A) surface treatment effect, color and sample plan according to the sampling plan
B) rated voltage, rated current, standard number, certification mark,
C) lamp model, voltage, current, certification marks a clear, complete screw cap mouth ring surface should clean and bright, should not wrinkle,
D) wires with smooth surface, no scratches, through parts no sharp edges, burrs, uniform insulation thickness, the thread processing reference samples (immersion tin, riveting terminal).
E) the wire is fixed and the screw is not dropped. Lamp shrapnel and hardware requirements without loosening, tilt, and lamp good contact,
F) no rust surface, no cracks in thick material specifications to meet the requirements, the damage.

E27 F519 lamp holder

E27 socket, E39 lamp holder is refers to the ordinary screw lamp cap size, usually E27 socket is use incandescent lamp, E40 is bigger than e27 lamp holder, more use for the metal halide lamp and high pressure sodium bulbs.

MR16 lamp holder: “MR” means Multi-face reflect, many sided reflection (cup), “16” means bulb caliber (the unit is 1 / 8 inch),the caliber of MR16 socket:16×1/8=2 inch≈50mm, “MR” is the push-in lamp holder,two pins, usually use for the halogen lamps and led lamps,it’s very convenient to install.

light bulb socket sizes

GU10 lamp holder:  “GU” is the bayonet type. GU: “G” means lamp holder type is a plug-in, “U” means lamp is U shape, the “10” shows the center distance of lamp foot holes (mm). The good quality GU10 lamp holders with 15cm silicon wire,
Rated voltage & Amp at:    2A, 250V,
Contact : Nickel-plated copper,
Cable choose: silica, braided, teflon, high temperature resistant,
Available wire: 0.5 / 0.75 / 1mm2,
Body material: Ceramic body, metal fitting,
Cetificate: UL,TUV,CE,RoHS.

More relative articles: What’s the porcelain lamp socket?

What kind of lights suit for gu10 lamp holders?