Ceramic Halogen dichroic lamp holder:
European GX5.3 low voltage dichroic lamp holder and lead sets,
Ceramic push in dichroic lamp holder,
Suitable for use with low voltage downlights
Available in a range of lead lengths
Silicon insulated leads are crimped to lamp holder terminations.
Round Steatite body:
Copper, nickel-plated double wipe contacts with
stainless steel reinforcing springs
Standard lead wires are 18 AWG SEW-1 (SF1)
200°C, 12″ long, stripped 12″
Multi-pin base provides maximum flexibility
and reduces inventory costs
Mounts using 2 screws in recessed nests through
Halogen socket body
Other wire types, lengths and terminations are
available upon request, contact the factory.
Mr16 dichroic lamp holder, commonly called halogen socket, are used to secure bulbs in ceiling lighting fitting and to provide a safe, reliable connection to the electrical power source. FURI produce ceramice MR16 dichroic lamp holder for high temperature applications that include mainly Tungsten Halogens, Incandescent and HID bulb types. FURI provides CE & UL certified halogen socket for many diverse product applications. Some of them include: interior and exterior building illumination, Stage, studio and film, store displays and large areas for general illumination.
Ceramic MR16 dichroic lamp holder: maximum outside diameter of 2 inches with a multi-faceted reflector lamps in the lighting industry, lighting models by the letters of the alphabet and numbers,MR is the abbreviation of the English Multifaceted (Mirror) Reflector means a plurality of reflecting Surface composition into the reflector. The digital representation of the maximum outer size of the lamp, as a multiple of 1/8 inch, “16” indicates the lights,With the maximum outer diameter is 2 inches.
Standard porcelain G5.3 dichroic lamp holder:
With heat resistant flying Leads
Approximately 300mm long
12mm spacing between each fixing hole
Can be used with standard low voltage MR16 downlighters.
Comes with 12v connector block.
Porcelain lampholders MR16 MR11 12V Low Voltage Lampholders – Wire Connector dichroic lamp holders for Lamp Light Recessed Downlights.
A standard GU10 dichroic lamp holder with 21cm tails. This product is suitable for use with fire rated downlights.New Regulation GU10 240v Mains Holder, Holder has Build in wire fixer to stop the holder’s wire coming out and heat cover stops the wires burning out by the heat, Holder has 200mm fly lead with Ceramic Lamp Holder with Protected cover backing and heat cover Fitting for standard GU10 bulb cover Fitting for standard GU10 bulb, CE
Dichroic lamp holder Specifications:
1.Color: More than 7 color
Dichroic lamp holder Wire selection:
0.5m2 braided wire 15CM
0.3m2 silicon rubber wire 15CM
0.5m2 silicon rubber wire 15CM
0.75m2 silicon rubber wire 15CM
0.3m2 silicon rubber braided wire 15CM
0.5m2 silicon rubber braided wire 15CM
0.75m2 silicon rubber braided wire 15CM