Professional Custom Lamp Holder Accessories Manufacturer

The bayonet and screw the lamp holders belong to the building the field of electrical equipment from the cavity cylindrical insulating housing with insulating spacers threaded on the packages in the separator side of the housing within the U-shaped metal tube, fitted on the spacerlong metal contact plate, installed in one side of the bottom of the threaded tube of the metal short-contact piece, the installation of two metal post on the other side of the spacer as the main component. At both ends of the threaded pipe diameter from the tube the rim wall down to open two symmetrical L-shaped bulb hanging slot open U-shaped notch on the bottom of the threaded pipe, the gap at the outcrop partition, partition coat has long contact piece, long, short contact piece is connected with the metal terminal on the other side of the spacer, respectively, and two terminal respectively connected with one pole of the power supply. The generic lamp holders can be convenient comfortable tipping bayonet, screw incandescent bulbs or fluorescent energy-saving lamp.