China manufacturer and supplier of E27 lamp holder and GU10 lamp holder

 

 

Email:
Support
James Lamp Holder

Email: Sales@lampholder.net
URL : www.lampholder.net

 

Home » Faq
  • [2015-11-06]
    Some people are confused about the light socket and lamp holder, so i tell you how to distinguish them, The light socket is the receptacle connected to the electrical supply, the holder is the end of the lamp that fits into the socket.also called lamp holder, Fuzhou is the center of porcelain lamp holder manufacturer....
  • [2015-11-05]
    Of course, the answer is porcelain lamp holder. But the ceramic lamp holder is not easy to transport,it's fragile easy to break, it's heavy, the cost of transportation is high.Bakelite lamp holder is not environmentally friendly, Unrecyclable. High temperature resistant 180-250 and expensive cost, High temperature porcelain lamp holder, ceramic lamp holder temperature higher than 3000 degrees, bakelite lamp holder temperature of 180 degrees, 10 minutes to burn....
  • [2015-10-28]
    In sports venues using high power LED floodlight in the workplace can be more uniform and soft and is cold light source will not give to the stuffiness, excellent color reduction is conducive to the spread of television and the press photos and other lamps and lanterns can be issued certain wavelengths of light to promote the excitement of the athletes to he Shujin Huoxue to make better sense to create good results. At the same time, energy saving and environmental protection products using long life, maintenance free. It also gives the sports management department bring economic and convenient maintenance....
  • [2015-10-26]
    LED lamps is very popular to our life, how to choose the right led socket, the tips as below: LED lamp socket, usually called "fluorescent light socket", LED holders for fluorescent lamps: tube T5, T8, T12 and T2 with reduced dimensions, Slim line, circular, VHO (Very High Output) lamps and HO (High Output) with high luminous efficiency, "U" shaped and compact fluorescent lamps. LED tubes are the most used lamps for the internal lighting of industrial and commercial areas....
  • [2015-10-26]
    Halogen Mr16 lamp holder, normally named halogen light socket, are applied to safe bulbs in ceiling lighting fitting and to provide a secure, trusted connection towards the electrical energy supply. FURI make ceramice MR16 socket for higher temperature applications that consist of mostly Tungsten Halogens, Incandescent and HID bulb sorts. FURI provides CE & UL certified halogen socket for many diverse product applications. Some of them consist of: interior and exterior building illumination, Stage, studio and film, store displays and large areas for general illumination....
  • [2015-10-14]
    Porcelain lamp holder is produced of radioceramic, radioceramic are elements of ceramic to provide solutions for lamp holder with special needs.Ceramics provide lots of benefits in comparison to other supplies. They aremore heat and corrosion resistant than metals or polymers; much less dense than most metals and their alloys; and their raw supplies are both plentiful and inexpensive. These fantastic properties facilitate their use in lots of unique item places.The typical engineer ceramics consist of alumina ceramic, steatite ceramic, zirconia ceramic, cordierite ceramic and titanium ceramicetc.Should you be looking for a material which has a longer functioning life and may stand up to put on, corrosion and high temperature, the radioceramic could be the answer....
  • [2015-10-13]
    Lamp holder E14, E27, E12, E26 are very popular in our daily life,“E” at the beginning is usually: screw socket, GU10 Gu at the beginning for our daily use of the bayonet. GU:G said lamp type is a plug-in, u said lamp presents a U shape, the numbers behind said lamp foot hole center distance (mm, mm). How to choose the right lamp holder,the tips as following:...
  • [2015-10-06]
    Whether it is a new home decoration or old house, choose the lamp all are important. Now a lot of types of market of home lighting, simply count is glass, plastic, wood, leather, metal and other categories of thousands of style....
  • [2015-10-03]
    lamp holder size. The lamp holders in national standard for screw cap or bayonet lamp. Cap quality relates to energy-saving lamps of interchangeability and protection against electric shock and other security requirements, cap the size of unqualified easily lead to broke off from the lamp holder, lamp and electric shock risk...
  • [2015-09-28]
    the control switch, you can save a lot of trouble. Because if only a total switch, a few lamp holder with cord, can not choose the light and shade...

James supply the lamp holders, bulb holders, E27 lamp holder and GU10 lamp holder 30 years!

Copyright @2012-2016 James Lighting Ceramics & Electronic CO.,LTD