Professional Custom Lamp Holder Accessories Manufacturer

[2013-03-08]

The light-emitting diode module spotlights,by the led lamp holders, light source installed in the lamp holder and lamp shade. The lampholders include aluminum substrate, waterproof apron, the power supply housing and the drive, waterproof apron connection between the aluminum substrate and power supply housing, the drive is installed in the power supply enclosure. The light source is a light emitting diode module...

[2013-03-07]

The waterproof moistureproof fluorescent lamp holders, suitable for moisture condensation or shallow water environment. Good insulation properties of rubber or resilient plastics material made ​​its one end about 1/2 part of a hollow tubular, the pipe inner diameter is slightly smaller than the corresponding fluorescent tube outside diameter, the length can be formed with the glass portions of the fluorescent tubes partially overlap...

[2013-03-07]

Lampholders, which includes three parts of the ferrule, intubation, the inner core, to make mortise inner core and intubation through mechanical principles seal, so as to achieve a leakage current of less than 0.5mA potential is less than 21.1V and preventionrainwater from entering the porcelain lamp holders and conductive caused by phenomena such as wounding and fire, while adapting to American UL safety test center proposed to be effective January 1, 1997 implementation of the new standard of UL....

[2013-03-07]

Movable the Christmas light combination lamp holders,that achieve waterproof effect lampholders. It is composed by connectors, waterproof apron, lamp holders, copper needles, the main line, nut. Its main feature is the main line fixed in the lamp holder slot lampholders with nut tighten the connector into the lampholder. Porcelain lampholders with connectors on the The waterproof apron near the copper needle at ring waterproof tendons, achieve waterproof....

[2013-03-07]

Christmas light base, the two parts of the porcelain lamp holders and the rear cover, the lamp has a power supply to the lamp with the positive and negative power supply copper, wire slots, in conjunction with the bulb of the thread and with the back cover with the socket, after the cover hascard cooperating with the lampholders, characterized in that the inner and the lamp cover is opened for rainwater outflow apertures. Christmas lights after power placed in the room when the rain is having an affair, rainwater flows into the lamp holders, but immediately discharged from the hole, not the formation of stagnant water, in order to avoid a short circuit accident....

[2013-03-06]

Mechanical ceramic: ceramic frame, ceramic bolts, porcelain lamp holders, ceramic top, ceramic gear, ceramic rod, and so on. Zirconia ceramics have high hardness, wear resistance, high toughness, low friction coefficient, good corrosion resistance, is widely used in mechanical seals, milling media, cutting tools, ceramic bearings, automotive engine parts, paper machine dehydration equipment, etc.. The abrasion resistance of the zirconium oxide ceramic is alumina ceramic of 15 times, the coefficient of friction of the zirconium oxide ceramic is only 1/2 of the alumina ceramic, and the coefficient of friction of the alumina ceramic is very low. The density of the zirconia ceramics was 3.5 higher than the alumina ceramic...

[2013-03-06]

01. Electronic ceramics, lighting, porcelain lamp holders and wear-resistant ceramics (also known as alumina ceramic): steatite, July 5 porcelain, T & porcelain, 1995 porcelain, 1996 porcelain, ninety-nine porcelain, porcelain high purity; production substrate substrate, porcelain shell, porcelain stand, porcelain, ceramic ring, ceramic rods, porcelain eyes, tube socket, circuit housing, spark plugs, insulating sleeve, wear-resistant valve plate, wear-resistant mechanical cochlear core automotive circuit wiring insulation ceramic everywhere and so on. 02. Zirconia ceramics: ninety-five zirconium porcelain, Hong zirconium porcelain; major production of cutting tools, engine components, steel mills Sheng molten steel equipment, military, aerospace applications pieces high-tech resistant parts, wear-resistant parts, anti-corrosion pieces....

[2013-03-05]

E27 lamp holders refers to the common spiral interfaces. B22 lamp holder is the interface of the bayonet. E14 lamp holder is the small spiral interface...

[2013-03-05]

The lamp holders industry associations organized the standard pin single-ended fluorescent lamp holders "will be assessed. The review group consisting of five experts lamp standard from the scientific, practical, in line with the enterprise actual production seriously detailed review. Assessment experts agree that the standard technical indicators of science, advanced, reasonable, agreed to "pin single-ended fluorescent lamp holders" standard through the assessment....

[2013-03-03]

E27 to E40 lampholders adapter 1. E27 E14 B22 GU10 MR16 2. 2A-4A, 250V-600V 3, CE, ROHS, UL, VDE Lampholder adaptor 1. E27 E14 B22 GU10 MR16 2. 2A-4A, 250V-600V 3, CE, ROHS, UL, VDE...