e26 ceramic lamp holder


e26 e27 ceramic lamp holder

ES Medium e26 ceramic lamp holder domensions are 45mm high by 40mm wide (26mm screw).

Unglazed porcelain body on E26 ceramic lamp holder with threaded male,
threaded female or rivet type brackets.
Standard lead types are AWM 18 gauge 1050 1250 1500
plastic insulated wire.
(Bare copper ground wire available upon request.)
Standard screw shells are aluminum.
(Brass and nickel plated brass available at extra cost.)
Bracket types available,
Standard packed 200 to a carton.
Spring center contact
Keyless, commercial grade, rated 660W/250V
E26 F330 ES Medium light bulb Socket – fits standard incandescent bulb bases
Straight body with screw terminals on bottom
Dimensions: 1.5″ overall diameter (“A” dimension in diagram); 2-1/16″ overall height; and 1.69″ body height
0.03″ insulating washer
1/8 IPS threaded metal cap (27tpi)

e26 ceramic lamp holder , es lamp holders
e26 ceramic lamp holder dimensions is 45mm high by 40mm wide (26mm screw)
e26 ceramic lamp holder specifications are 45mm high by 40mm wide (26mm screw)
E26 white porcelain / ceramic lamp holder
Unglazed porcelain body
Nickel plated copper alloy screw shell
Medium base E26 socket – fits standard incandescent bulb bases
e26 ceramic lamp holder.

“medium” indicates a e26 ceramic lamp holder that is about 1″ in diameter. Synonyms for medium are “standard”, “Edison” and E26. It’s best to call medium “medium” or “E26” because when other bases are being discussed, the two other synonyms may cause confusion.

Here in the US and elsewhere, there are other screw-thread lamp bases that are prefixed with an “E” followed by a number indicating diameter expressed in millimeters. “Edison” is medium in the US.

Find More lamp holder types: porcelain holder e27porcelain lamp holder, e26 lamp holder, MR16 lamp holder