Why LED High bay lighting replace the HPS bulb

LED High bay lighting are the economical choice due to their long life, low power consumption and low heat output. LED High bay lighting fixtures for lighting warehouses, industrial, and retail facilities. As a general guideline, divide your current Metal Halide (MH) or High Pressure Sodium (HPS) bulb’s wattage by 3 or 4 for the comparable LED wattage.

LED High bay lighting

As we all know, there are many advantages of the LED High bay lighting such as energy-saving effect, long using life, no radiation, no stroboscopic effect, no noise, soft light, wide operating voltage and a series of good characteristics. Because of these good factors, the LED flood light has been increasingly welcomed by most of consumers.  the working condition of the 400W metal halide replacement could also show the quality of the LED lamps. In the normal working condition, the temperature rising should be relatively low. On the other hand, if the conditions of heat dissipation are not good, the led light would become very weak at high temperatures. At the same time, if the led high bay light has rapid blinking in the lighting on and off, there would exist quality problem.

At 125 lumens per Watt, James’s new ultra-efficient industrial LED High Bay lighting revolutionizes the world of LED High bay lighting and is by far the most innovative LED fixture available today. With a market-leading 10 year full performance warranty, the new 26,500 lumen high bay utilizes cutting-edge optical and electrical design to provide for significantly reduced glare and superior light distribution.

Each diode is about 1/4 inch in diameter and uses about ten milliamps to operate at about a tenth of a watt. LEDs are small in size, but can be grouped together for higher intensity applications. LED fixtures require a driver which is analogous to the ballast in fluorescent fixtures. The drivers are typically built into the fixture (like fluorescent ballasts) or they are a plug transformer for portable (plug-in) fixtures. The plug-in transformers allow the fixture to run on standard 120 volt alternating current (AC), with a modest (about 15 to 20 percent) power loss.

LED High bay lighting are better at placing light in a single direction than incandescent or fluorescent bulbs. Because of their directional output, they have unique design features that can be exploited by clever designs. LED strip lights can be installed under counters, in hallways, and in staircases; concentrated arrays can be used for room lighting. Waterproof, outdoor fixtures are also available. Some manufacturers consider applications such as gardens, walkways, and decorative fixtures outside garage doors to be the most cost-efficient.

LED High bay lighting are more rugged and damage-resistant than compact fluorescents and incandescent bulbs. LED lights don”t flicker. They are very heat sensitive; excessive heat or inappropriate applications dramatically reduce both light output and lifetime. LED High bay lighting bulb holders manufacturers.